O2 Oxygen Sensor Upstream Downstream for Nissan Frontier (2011-2012) 4.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Upstream & Downstream O2 Sensor Kit for 2011-2012 Nissan Frontier (D40)
What it Does: This 4-piece upstream and downstream oxygen sensor kit measures pre- and post-catalytic exhaust oxygen content on the 2011-2012 D40 Nissan Frontier VQ40DE 4.0L V6 to maintain stoichiometric fuel trim and monitor catalyst efficiency.
The Stock Nissan Frontier Oxygen Sensor Failure
On the D40 Frontier powered by the VQ40DE 4.0L V6, factory oxygen sensors endure severe exhaust heat soak, thermal cycling, and carbon contamination over time. As the internal zirconia sensing element ages or the internal heater circuit degrades, response time slows and output voltage drifts out of range. When bank-to-bank air-fuel feedback skews, the ECM loses accurate closed-loop control, triggering slow-response or circuit codes such as P0133, P0153, P0138, or false P0420/P0430 faults.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored heater or biased-signal fault codes like P0130, P0135, P0155, or P0420/P0430.
- Rough Idle & Hesitation: Sluggish upstream sensor switching causes erratic short-term fuel trims and uneven bank-to-bank throttle response.
- Higher Fuel Consumption & Failed Emissions: Defaulting to rich fueling lowers MPG and prevents downstream readiness monitors from completing.
The Direct-Fit 4-Piece Oxygen Sensor Solution
Replacing all four sensors simultaneously with kit AUT8362500US restores balanced bank-to-bank air-fuel feedback across both exhaust banks of the VQ40DE. Each direct-fit sensor features application-specific OE-style connectors and pre-terminated leads for plug-and-play installation without splicing generic harnesses. Corrosion-resistant housings withstand high exhaust temperatures while delivering accurate switching signals to the engine computer. Thread each sensor by hand—keeping grease and anti-seize off the sensing element—before torquing to specification.
What's Included
- 2x Upstream (Pre-Catalytic Converter) Direct-Fit Oxygen Sensors
- 2x Downstream (Post-Catalytic Converter) Direct-Fit Oxygen Sensors
Technical Specifications
| Fitment | 2011-2012 Nissan Frontier |
|---|---|
| Engine / Chassis | VQ40DE 4.0L V6 / D40 |
| Emissions & Sensor Spec | 4-Piece Direct-Fit (2 Upstream / 2 Downstream) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
Compatibility
- 2011-2012 Nissan Frontier 4.0L (Confirm engine displacement, model year, and connector style prior to ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the D40 Frontier?
Yes. This is a direct fit for the 2011-2012 Nissan Frontier equipped with the VQ40DE 4.0L V6 engine. Not compatible with 2.5L 4-cylinder models or other model years; verify connector style before ordering.
Will replacing all four sensors clear O2 and P0420/P0430 codes?
Yes, when faulty sensors are the root cause. Installing a matched pre- and post-cat set prevents an aging partner sensor from skewing fuel trim or triggering false P0420/P0430 codes. Clear stored codes and complete a drive cycle so monitors reset.
Is wire splicing or anti-seize required for installation?
No splicing is required. Each direct-fit sensor uses the factory-style plug, though you must keep grease and anti-seize off the sensing tip, start threads by hand, and torque to factory spec.
The Nissan Heavy-Duty Standard
Engineered for the sustained exhaust heat of towing, hauling, and daily driving on the D40 platform, this matched 4-sensor kit restores factory fuel-trim precision to your VQ40DE. Keep your emissions readiness monitors compliant and your check-engine light off mile after mile.
Mueble
Mueble
|
Hacer |
Nissan |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$83.95