O2 Oxygen Sensor Upstream Downstream for Mitsubishi Lancer (2008-2011) 2.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2008-2011 Mitsubishi Lancer (CY4A)
What it Does: This matched upstream and downstream O2 sensor kit for the 2008-2011 Mitsubishi Lancer CY4A (4B11 2.0L) regulates closed-loop fuel trim and monitors catalytic converter efficiency.
The Stock Mitsubishi Lancer Oxygen Sensor Failure
Factory oxygen sensors on the CY4A Lancer endure severe thermal cycling and carbon fouling from the 4B11 2.0L exhaust stream. Over time, internal heater circuits burn out or the zirconia element becomes poisoned and sluggish, delaying closed-loop voltage switching. When pre-cat or post-cat sensors drift, the ECM triggers P0135, P0141, or P0420 codes. Replacing only one unit leaves an aged partner sensor skewing long-term fuel trim.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored codes like P0135, P0141, P0171, or P0420 from erratic millivolt switching.
- Rough Idle & Hesitation: Delayed stoichiometric correction causes stumble under throttle load.
- Failed Emissions & High Consumption: Incomplete readiness monitors and rich fueling fail inspections.
The Direct-Fit Dual-Sensor Oxygen Sensor Solution
This two-piece kit replaces both pre-cat and post-cat positions simultaneously to restore synchronized air-fuel telemetry on the 4B11 2.0L. Each sensor uses a fast-acting planar zirconia element, stainless steel housing, and OEM-spec heater circuit for rapid cold-start light-off. Factory-terminated connectors match 234-4116 and 234-4114, eliminating wire splicing or impedance mismatch. Paired installation stabilizes fuel trim and enables complete catalytic monitor readiness.
What's Included
- 1x Upstream (Pre-Catalytic Converter) Oxygen Sensor
- 1x Downstream (Post-Catalytic Converter) Oxygen Sensor
Technical Specifications
| Fitment | 2008-2011 Mitsubishi Lancer |
|---|---|
| Engine / Chassis | 4B11 2.0L I4 / CY4A |
| Emissions & Sensing | OBD-II Direct-Fit / Heated Zirconia Ceramic |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 234-4116, 234-4114 |
Compatibility
- 2008-2011 Mitsubishi Lancer 2.0L (confirm displacement, model year, and connector style before ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the CY4A Lancer?
Yes. Fits 2008-2011 Mitsubishi Lancer models equipped with the 4B11 2.0L engine. Excludes 2.4L models and unlisted engines; verify connector style prior to ordering.
Will this clear P0135 or P0420 codes without splicing?
Yes, if sensor-induced, with zero splicing. Plugs directly into factory harnesses matching 234-4116 and 234-4114; clear stored codes and complete a drive cycle.
Any installation prep required for the sensor threads?
Yes, hand-thread first and avoid tip contamination. Keep grease and anti-seize completely off the sensing element before torquing the body to spec.
The Mitsubishi Precision Standard
Engineered for JDM responsiveness, this paired sensor kit restores crisp throttle response and accurate air-fuel metering across the rev range, keeping your CY4A Lancer running clean and CEL-free.
Mueble
Mueble
|
Hacer |
Mitsubishi |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$53.95