O2 Oxygen Sensor Upstream Downstream for Mercury Sable (1996-2009) 3.0L, 3.5L

$100.95

Envío calculado al finalizar la compra.

Pago totalmente seguro
Con la confianza de miles de personas
Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Compre con seguridad

Asegure su experiencia de compra con varios métodos de pago seguros y confiables.

Compra segura con nosotros

Direct-Fit Oxygen Sensor 4-Piece Replacement Set for 1996-2009 Mercury Sable (DN186 / D3)

What it Does: The 4-piece oxygen sensor set replaces degraded upstream and downstream lambda sensors on the 1996-2009 Mercury Sable to restore stoichiometric air-fuel feedback and extinguish check engine diagnostics.

The Stock Mercury Sable Sensor Degradation & Exhaust Contamination

Sustained thermal cycling, carbon fouling, and silicates progressively coat the factory zirconia sensing element on high-mileage DN186 and D3 platforms. As internal ceramic heater resistance drifts out of spec, switching speed lags, causing the powertrain control module (PCM) to miscalculate fuel trims. This unmetered rich or lean condition causes rough idling, unburned fuel wash, catalyst overheating, and recurring trouble codes including P0130, P0161, P0420, and P0430.

The Engineering Solution

Manufactured with laser-welded stainless steel housing bodies and fast-acting internal ceramic planar heaters, these direct-fit sensors reach operating temperature in seconds for rapid closed-loop engine management. Precision dual-layer outer shields protect the porous platinum sensor thimble against thermal shock and exhaust condensation. Factory-molded weather-pack connectors, vehicle-specific wire lengths, and pre-threaded M18x1.5 bodies plug directly into the OEM harness without cutting, pinning, or splicing.

What's Included

2 Upstream Oxygen Sensors
2 Downstream Oxygen Sensors

Technical Specifications

Fitment	1996-2009 Mercury Sable
Engine / Chassis	3.0L Vulcan, 3.0L Duratec 30, 3.5L Duratec 35 / DN186, D3
Stock Output	145-263 hp / 170-249 lb-ft
Replaces OEM Part #	SG1813, 234-4001, 234-4046, 234-4070, 234-4071, 234-4127, 234-4401, 22013, 22016, 22060, 22071, 22500

Compatibility

1996-2005 Mercury Sable 3.0L V6 (Vulcan / Duratec 30)
2008-2009 Mercury Sable 3.5L V6 (Duratec 35)

Frequently Asked Questions & Fitment Warnings

Does this fit the DN186 and D3 Sable?

Yes, this is a direct fit for the 1996-2009 Mercury Sable equipped with the Vulcan 3.0L, Duratec 30, or Duratec 35 engines. Verify sensor positions and connectors for your exact engine before ordering.

Do I need special tools or preparation to install these sensors?

Use a dedicated slotted 7/8-inch (22mm) oxygen sensor socket, route harness leads away from exhaust manifolds, and apply anti-seize exclusively to threads while keeping the sensing tip uncontaminated.

The Mercury Standard

Delivers OE-grade transient response and signal integrity to preserve factory highway cruising range, emissions readiness, and smooth idle stability across all domestic driving conditions.