Saltar al contenido del producto
1 de 4

O2 Oxygen Sensor Upstream Downstream for Mercury Mariner (2009-2010) 2.5L



Precio regular $73.95
Precio de oferta $73.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2009-2010 Mercury Mariner (U387)

What it Does: This matched upstream and downstream O2 sensor kit restores closed-loop air-fuel monitoring and catalyst efficiency verification on the 2009-2010 Mercury Mariner (U387) with the Duratec 25 2.5L I4.

The Stock Mercury Mariner Oxygen Sensor Failure

Over high-mileage thermal cycles, factory oxygen sensors on the U387 chassis with the Duratec 25 2.5L I4 suffer ceramic element contamination from oil ash, silicone, and unburned fuel deposits. Internal heating element degradation slows closed-loop transition times, causing delayed voltage switching and skewed fuel trim calculations by the PCM. This sensor sluggishness frequently triggers P0135 or P0141 heater circuit faults alongside P0130 and P0171 lean-condition codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0135, P0141, P0130, or false P0420 codes from slow downstream voltage response.
  • Rich Exhaust & Fuel Economy Drop: Skewed lean readings force PCM over-fueling, fouling spark plugs and increasing fuel consumption.
  • Failed Emissions & Rough Idle: Delayed closed-loop entry raises tailpipe hydrocarbons and causes light-throttle cruising surge.

The Direct-Fit Upstream & Downstream O2 Sensor Solution

Engineered as a matched replacement for OEM numbers 234-5113, 234-5097, 234-4609, and 234-4610, this kit addresses both pre-cat and post-cat exhaust monitoring points simultaneously. Each sensor utilizes a laser-welded stainless steel housing and porous PTFE filter to block moisture and soot ingress while maintaining rapid thermal response. Factory-length wiring harnesses with OEM-style weatherproof connectors plug directly into the U387 body harness for precise signal integrity without splicing.

What's Included

  • 1 x Upstream Oxygen Sensor
  • 1 x Downstream Oxygen Sensor

Technical Specifications

Fitment 2009-2010 Mercury Mariner
Engine / Chassis Duratec 25 2.5L I4 / U387
Emissions & Sensor Spec Direct-Fit Heated Zirconia (Upstream & Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5113, 234-5097, 234-4609, 234-4610

Compatibility

  • 2009 Mercury Mariner 2.5L
  • 2010 Mercury Mariner 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the U387 Mariner?

Yes. Direct fit for the 2009-2010 Mercury Mariner equipped with the Duratec 25 2.5L I4 engine. Excludes 3.0L V6 models; confirm engine displacement and connector style before ordering.

Will replacing both sensors clear P0135, P0141, or P0420 codes?

Yes, when sensor-related. Replacing degraded sensors matching 234-5113, 234-5097, 234-4609, and 234-4610 resolves heater and switching faults; a persistent P0420 indicates catalytic substrate failure.

Are splicing tools or adapters required for installation?

No. Both direct-fit sensors feature OEM-style plug-and-play connectors and thread directly into factory exhaust bungs using a standard 22mm O2 sensor socket.

The Mercury Precision Standard

Built to maintain factory PCM fuel-trim accuracy and emissions compliance. Replacing upstream and downstream sensors together ensures balanced closed-loop feedback and reliable CEL-free operation.




Mueble

Hacer

Mercury

Tamaño del motor

  • 2.5L

Año

  • 2009
  • 2010

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Mercury Mariner (2009-2010) 2.5L

$73.95