O2 Oxygen Sensor Upstream Downstream for Mazda CX-7 (2007-2012) 2.3L Turbo
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Direct-Fit O2 Oxygen Sensor Kit for 2007-2012 Mazda CX-7 (ER)
What it Does: This matched upstream and downstream oxygen sensor kit measures pre- and post-catalyst exhaust oxygen on the 2007-2012 Mazda CX-7 (ER) L3-VDT 2.3L Turbo to maintain accurate closed-loop fuel trims.
The Stock Mazda CX-7 Oxygen Sensor Failure
On the ER chassis powered by the L3-VDT 2.3L DISI Turbo, factory oxygen sensors endure extreme exhaust gas temperatures and aggressive boost fueling cycles. Sustained heat soak fractures the internal zirconia ceramic element while soot and crankcase oil vapors foul the platinum electrodes. Internal heater circuits also suffer wire fatigue, delaying closed-loop switching and triggering P0134, P0135, or P0420 fault codes.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & DTCs: Triggers P0130, P0134, or P0135 codes from degraded sensor or heater response.
- Rich Running & Fuel Skew: Sluggish switching forces rich fuel maps, fouling plugs and lowering MPG.
- Emissions & Catalyst Faults: Erratic downstream voltage causes false P0420 codes and failed emissions tests.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
This matched upstream and downstream kit uses OE-calibrated planar zirconia elements engineered for rapid light-off and stable output under high-EGT turbo operation. Each sensor features a laser-welded stainless housing with a protective shield to resist thermal shock and exhaust soot fouling. Pre-terminated OEM weatherpack connectors, heat-sleeved harnesses, and anti-seize coated threads ensure direct plug-and-play installation matching 234-5012, 234-4044, and L33L188G1E9U specs.
What's Included
- 1 Upstream Oxygen Sensor
- 1 Downstream Oxygen Sensor
Technical Specifications
| Fitment | 2007-2012 Mazda CX-7 |
|---|---|
| Engine / Chassis | L3-VDT 2.3L Turbo / ER |
| Sensor Architecture | Direct-Fit Heated Zirconia (Upstream & Downstream) |
| Installation Type | Direct Bolt-On OEM Replacement (Plug-and-Play, No Splicing) |
| Replaces OEM Part # | 234-5012, 234-4044, 234-4542, L33L188G1E9U, L3BT188G1, FS1H18861A, KLS618861, KLS618861A |
Compatibility
- 2007-2012 Mazda CX-7 2.3L Turbo (ER / L3-VDT)
Frequently Asked Questions & Fitment Warnings
Does this fit the ER CX-7?
Yes. Fits 2007-2012 Mazda CX-7 (ER) with the L3-VDT 2.3L Turbo engine. Excludes 2010-2012 2.5L naturally aspirated models; confirm engine before ordering.
Will this clear P0134, P0135, or P0420 codes?
Yes, if sensors are faulty. Replacing both units resolves P0134/P0135 heater faults and false P0420 triggers if the catalyst is intact.
Are splicing or special connectors needed?
No. Direct-fit OEM plugs allow plug-and-play installation; keep anti-seize strictly on the threads, never the sensing tip.
The Mazda Precision Standard
Engineered for accurate ECU fuel-trim feedback and CEL-free operation on the L3-VDT 2.3L Turbo. Built for turbo exhaust heat, it restores emissions compliance and throttle response.
Mueble
Mueble
Garantía
Garantía
