O2 Oxygen Sensor Upstream Downstream for Lincoln Mark LT (2006-2008) 5.4L

$101.95

Envío calculado al finalizar la compra.

Pago totalmente seguro
Con la confianza de miles de personas
Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Compre con seguridad

Asegure su experiencia de compra con varios métodos de pago seguros y confiables.

Compra segura con nosotros

Direct-Fit Upstream and Downstream Oxygen Sensor Set for 2006-2008 Lincoln Mark LT (P221)

What it Does: The oxygen sensor set continuously measures exhaust gas stoichiometry and catalyst efficiency on the 2006-2008 Lincoln Mark LT to maintain closed-loop fuel control and prevent diagnostic trouble codes.

The Stock Lincoln Mark LT Sensor Degradation

Operating inside the extreme thermal environment of the exhaust stream, factory oxygen sensors on the P221 chassis experience severe chemical contamination and thermal fatigue over time. Carbon build-up, unburned fuel, and silicon poisoning gradually coat the porous ceramic zirconia electrolyte element. As this internal sensing element fouls, voltage response rates decelerate drastically, leading to sluggish switching between lean and rich conditions. On the Modular 3V V8, this degradation distorts short-term and long-term fuel trims, forcing the PCM into an inefficient, rich default baseline that degrades fuel mileage, destabilizes idle, and causes common OBD-II trouble codes including P0130 through P0161, as well as false-positive P0420/P0430 catalyst degradation faults.

The Engineering Solution

Engineered to exact OEM operational tolerances, this complete 4-piece sensor package features calibrated planar zirconia ceramic sensing cores protected by laser-welded, double-layered 304 stainless steel shielding. This robust outer sheath defends internal elements against thermal shock and soot deposition while promoting laminar exhaust gas contact. The internal high-speed ceramic heater circuit brings sensors to optimal 600°F closed-loop operating temperatures in seconds, minimizing cold-start emissions. Each unit features factory-matched pigtail wiring harnesses, correct wire lengths, protective woven fiberglass thermal sleeving, and OE-spec keyed locking connectors for true plug-and-play installation without wire splicing or pin repinning.

What's Included

2 Upstream Oxygen Sensors (Pre-Catalytic Converter)
2 Downstream Oxygen Sensors (Post-Catalytic Converter)

Technical Specifications

Fitment	2006-2008 Lincoln Mark LT
Engine / Chassis	5.4L 3V SOHC Modular V8 / P221
Stock Output	300 hp / 365 lb-ft
Replaces OEM Part #	SG459, 234-4046, 234-4070, 234-4071, 234-4127, 234-4401, 234-4402, SG1801, SG1802, SG1803, SG1806, SG1807

Compatibility

2006 Lincoln Mark LT Base 5.4L V8 (330 CID, 24V)
2007 Lincoln Mark LT Base 5.4L V8 (330 CID, 24V)
2008 Lincoln Mark LT Base 5.4L V8 (330 CID, 24V)

Frequently Asked Questions & Fitment Warnings

Does this fit the P221 Mark LT?

Yes, this is a direct fit for the 2006-2008 Lincoln Mark LT equipped with the 5.4L 3-valve Modular V8 engine. Verify sensor positions and connectors match your factory harness before ordering.

Should anti-seize compound be used during installation?

Apply high-temperature conductive anti-seize sparingly to the threads only, ensuring none touches the slotted sensor tip or shield holes to prevent immediate sensor poisoning.

The Lincoln Durability Caliber

Built to handle the demanding exhaust gas temperatures and high-load demands of full-size luxury towing, these sensors restore smooth throttle management and factory fuel efficiency across heavy duty cycles.