O2 Oxygen Sensor Upstream Downstream for Lexus GS (2000-2005) 3.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Upstream & Downstream O2 Sensor Kit for 2000-2005 Lexus GS (JZS160)
What it Does: This 4-piece oxygen sensor kit monitors pre- and post-catalyst exhaust gas on the 2000-2005 Lexus GS (JZS160) equipped with the 2JZ-GE 3.0L I6 engine so the ECM can regulate stoichiometric air-fuel trim and verify catalytic converter efficiency.
The Stock Lexus GS O2 Sensor Failure
Over high mileage, factory oxygen sensors on the JZS160 equipped with the 2JZ-GE 3.0L suffer from thermal fatigue, internal heater circuit burnout, and zirconia element contamination from oil or coolant ash. As response slows, closed-loop voltage switching lags and corrupts fuel trim tables across both banks. Replacing only one unit leaves aged partner sensors with mismatched response times, often triggering P0135, P0155, P0141, or P0171 fault codes.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Heater circuit resistance faults and slow-response codes such as P0135, P0141, P0155, P0161, or catalyst efficiency warning P0420.
- Rough Idle & Hesitation: Biased upstream voltage signals disrupt closed-loop fueling, causing uneven idling and hesitation under throttle load.
- High Fuel Consumption & Failed Emissions: Default rich fueling increases fuel burn and prevents readiness monitors from setting during emissions testing.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
This matched 4-piece kit restores uniform exhaust sampling across both pre-cat and post-cat positions using factory-spec heated zirconia sensing elements in corrosion-resistant stainless steel housings. Direct-fit OEM-style connectors and exact harness lengths eliminate wire splicing and voltage drop common in universal kits. Matching interchange references 234-4630, 234-4048, 234-4603, and 234-4626 ensures stable closed-loop ECM fueling and accurate catalytic converter monitoring.
What's Included
- 2 Upstream Oxygen Sensors
- 2 Downstream Oxygen Sensors
Technical Specifications
| Fitment | 2000-2005 Lexus GS |
|---|---|
| Engine / Chassis | 2JZ-GE 3.0L I6 / JZS160 |
| Sensor Architecture | 4-Wire Direct-Fit Heated Zirconia (2 Upstream, 2 Downstream) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 234-4630, 234-4048, 234-4603, 234-4626 |
Compatibility
- 2000-2005 Lexus GS 3.0L (JZS160 / 2JZ-GE)
Frequently Asked Questions & Fitment Warnings
Does this fit the JZS160 GS?
Yes. This is a direct fit for the 2000-2005 Lexus GS equipped with the 2JZ-GE 3.0L I6 engine. Excludes V8 GS400/GS430 models and other engine displacements or model years; confirm engine and connector style before ordering.
Will this kit clear P0135, P0155, or P0420 codes?
Yes, when triggered by degraded sensors. Replacing all four units restores uniform response for heater and circuit codes like P0135, P0141, P0155, and P0161; clear stored DTCs after installation and complete a drive cycle so readiness monitors reset (a failed catalytic converter will still trigger P0420).
Is wire splicing or special thread prep required during installation?
No splicing is required. Direct-fit plugs match references 234-4630, 234-4048, 234-4603, and 234-4626; hand-thread each sensor body before tightening to the specified torque and keep grease or anti-seize off the sensing tip.
The Lexus Precision Standard
Engineered to restore factory closed-loop fuel control on the 2JZ-GE platform, this 4-piece sensor kit keeps fuel trims balanced and emissions readiness monitors active. Accurate bank-to-bank feedback delivers crisp throttle response, clean emissions compliance, and reliable CEL-free operation.
Mueble
Mueble
|
Hacer |
Lexus |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$85.95