Saltar al contenido del producto
1 de 3

O2 Oxygen Sensor Upstream Downstream for Kia Rondo (2009-2010) 2.4L



Precio regular $83.95
Precio de oferta $83.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2009-2010 Kia Rondo (UN)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust air-fuel ratios and catalyst efficiency on the 2009-2010 Kia Rondo (UN) with the G4KE 2.4L engine, delivering accurate closed-loop voltage signals to the ECM.

The Stock Kia Rondo Oxygen Sensor Failure

On high-mileage UN Rondo models with the G4KE 2.4L engine, factory oxygen sensors degrade from exhaust heat soak, thermal shock, and carbon or oil-ash fouling on the zirconia element. As contaminants glaze the sensing tip, ion transfer slows and voltage switching lags behind ECM targets. Repeated cold-start cycling also fatigues internal heater coils, triggering open-circuit faults like P0135 and P0141 alongside slow-response code P0133.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Triggers P0133 (slow response), P0135/P0141 (heater failure), or P0171 (lean fuel trim) when feedback degrades.
  • Rough Idle & Hesitation: Corrupted Bank 1 Sensor 1 voltage forces default open-loop fueling and throttle stumble.
  • High Fuel Consumption: Lazy sensor switching causes rich over-fueling, fouled spark plugs, and failed emissions inspections.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

This matched upstream and downstream sensor kit restores closed-loop lambda accuracy and replaces OE number 39210-2G400 without wire splicing. Each unit uses a fast light-off planar zirconia element inside a laser-welded stainless housing to resist moisture and thermal cracking. Factory-length heat-shielded harnesses and OEM locking connectors ensure direct thread-in installation on the UN exhaust manifold and downstream catalytic converter pipe bungs.

What's Included

  • 1x Upstream Oxygen Sensor (Bank 1 Sensor 1)
  • 1x Downstream Oxygen Sensor (Bank 1 Sensor 2)

Technical Specifications

Fitment 2009-2010 Kia Rondo
Engine / Chassis G4KE 2.4L Theta II / UN
Emissions & Sensor Spec OBD-II Compliant / Heated Planar Zirconia Element
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 39210-2G400

Compatibility

  • 2009 Kia Rondo 2.4L
  • 2010 Kia Rondo 2.4L

Frequently Asked Questions & Fitment Warnings

Does this fit the UN Rondo?

Yes. This is a direct fit for the 2009-2010 Kia Rondo (UN) equipped with the G4KE 2.4L engine. Not compatible with 2.7L V6 models; confirm engine displacement before ordering.

Will this clear P0133, P0135, and P0141 codes?

Yes, when triggered by worn sensors or failed heater coils. Replacing both upstream and downstream sensors resolves P0133, P0135, and P0141 once cleared, provided exhaust leaks and wiring damage are absent.

Are factory connectors included for installation?

Yes. Both sensors include OEM-style plug-and-play connectors matching 39210-2G400 with no splicing needed. Clean M18x1.5 bung threads with a chaser and torque sensors to 30-35 lb-ft.

The Kia Precision Emissions Standard

Restoring matched lambda feedback keeps your G4KE 2.4L running cleanly with crisp throttle response and CEL-free operation. Engineered for daily thermal durability, this direct-fit kit keeps your UN Rondo compliant with factory ECM parameters.




Mueble

Hacer

Kia

Tamaño del motor

  • 2.4L

Año

  • 2009
  • 2010

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Kia Rondo (2009-2010) 2.4L

$83.95