Saltar al contenido del producto
1 de 5

O2 Oxygen Sensor Upstream Downstream for Kia Rio (2006-2009) 1.6L



Precio regular $36.95
Precio de oferta $36.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2006-2009 Kia Rio (JB)

What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust gas oxygen levels on the 2006-2009 Kia Rio (JB) G4ED 1.6L to maintain stoichiometric air-fuel trim and verify catalytic converter efficiency.

The Stock Kia Rio Oxygen Sensor Degradation

Factory oxygen sensors on the JB chassis equipped with the G4ED 1.6L engine endure constant thermal cycling and exhaust contamination. Over time, carbon fouling, silicone poisoning, or thermal shock degrades the internal zirconia sensing element and fractures the ceramic heater core. This causes sluggish voltage switching at the upstream sensor and open-circuit heater faults, triggering P0133, P0135, and P0141 codes while forcing the ECU into open-loop rich operation.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / Heater DTCs: Illuminated MIL with P0133 (slow upstream response), P0135 (Bank 1 Sensor 1 heater circuit), or P0141 (Bank 1 Sensor 2 heater circuit).
  • Sluggish Voltage & Rich Trim: Lazy millivolt switching forces the PCM to add excess fuel, fouling spark plugs and saturating the catalytic converter.
  • Failed Emissions & Poor Economy: Unregulated open-loop fueling drops fuel mileage and prevents OBD-II catalyst readiness monitors from setting.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

Replacing both sensors as a matched set restores rapid closed-loop feedback and accurate catalyst monitoring on your G4ED 1.6L. Each sensor utilizes a high-purity ceramic zirconia element paired with a fast-acting internal heater and corrosion-resistant stainless steel housing with protective vent slots. Factory-length wiring harnesses and OEM-style weather-pack connectors eliminate splicing, ensuring clean millivolt signal transmission and direct thread-in fitment matching 991778AP01S and 234-4851.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2006-2009 Kia Rio
Engine / Chassis G4ED 1.6L / JB
Emissions & Sensor Spec 4-Wire Heated Zirconia Ceramic (Upstream & Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 991778AP01S, ESG1695, E13461, 234-4851, EAES20158

Compatibility

  • 2006-2009 Kia Rio 1.6L

Frequently Asked Questions & Fitment Warnings

Does this fit the JB Rio?

Yes. This is a direct fit for the 2006-2009 Kia Rio equipped with the G4ED 1.6L engine. Confirm engine displacement before ordering; these sensors do not fit other engine configurations or model years outside 2006-2009.

Will this clear P0135/P0141 heater codes and restore fuel trim?

Yes, when failed sensors are the root cause. Installing this matched kit restores proper heater resistance and voltage switching for P0133, P0135, and P0141, though exhaust leaks and chassis-side wiring should be inspected before clearing codes.

Do these sensors require wire splicing or universal adapters?

No. Both units are direct-fit replacements with pre-terminated OEM connectors and factory harness lengths, matching ESG1695, E13461, and EAES20158 for plug-and-play installation using a 22mm oxygen sensor socket.

The Kia Precision Emissions Standard

Engineered for consistent commuter reliability, this matched sensor pair keeps your JB Rio operating in tight closed-loop fuel control. Accurate upstream and downstream feedback protects your catalytic converter from thermal overload and prevents emissions fault lights.




Mueble

Hacer

Kia

Tamaño del motor

  • 1.6L

Año

  • 2006
  • 2007
  • 2008
  • 2009

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Kia Rio (2006-2009) 1.6L

$36.95