Saltar al contenido del producto
1 de 5

O2 Oxygen Sensor Upstream Downstream for Jeep Cherokee (1996-2000) 4.0L



Precio regular $37.95
Precio de oferta $37.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 1996-2000 Jeep Cherokee (XJ)

What it Does: This matched upstream and downstream oxygen sensor kit measures exhaust oxygen concentration on the 1996-2000 Jeep Cherokee XJ 4.0L I6 to regulate closed-loop fueling and catalyst monitoring.

The Stock Jeep Cherokee Oxygen Sensor Failure

Factory zirconia sensing elements on the XJ equipped with the AMC 242 4.0L I6 endure severe exhaust manifold heat soak, trail water thermal shock, and oil vapor contamination. Over time, internal heater coils burn out and ceramic tips foul with carbon deposits, slowing millivolt switching. When response falls below threshold, the PCM logs P0135, P0141, or P0131 and reverts to rich open-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Codes P0135, P0141, or P0133 triggered by failed heater circuits or slow sensor switching.
  • Erratic Fuel Trims: Sluggish 0.1V–0.9V transitions cause rich exhaust odor and rough idle.
  • Reduced MPG & Emissions Failure: Open-loop fueling wastes fuel and overheats the catalytic converter.

The Direct-Fit Zirconia Oxygen Sensor Solution

This matched pair replaces both sensor positions simultaneously using thermal-shock-resistant zirconia ceramic elements inside laser-welded stainless housings. Factory-spec 4-wire heated circuits restore rapid light-off and crisp narrowband voltage oscillation for accurate PCM fuel trim calibration. Direct-fit weatherpack plugs and precision-machined threads install into stock exhaust bungs without wire splicing, matching interchange numbers 234-4076, 234-4077, 234-4078, and 234-4079.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 1996-2000 Jeep Cherokee
Engine / Chassis AMC 242 4.0L I6 / XJ
Sensor Architecture 4-Wire Heated Zirconia / Direct-Fit
Installation Type Direct-Fit OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 234-4076, 234-4077, 234-4078, 234-4079

Compatibility

  • 1996-2000 Jeep Cherokee 4.0L

Frequently Asked Questions & Fitment Warnings

Does this fit the XJ Cherokee?

Yes. This is a direct fit for the 1996-2000 Jeep Cherokee equipped with the AMC 242 4.0L I6 engine. Confirm engine before ordering; excludes 2.5L I4 models.

Will this clear P0135 and P0141 codes?

Yes. Replacing fatigued sensors restores heater resistance and switching speed to clear P0135 and P0141 after resetting the PCM.

Is wire splicing required for installation?

No. Both sensors include pre-terminated OEM connectors for plug-and-play installation into factory harnesses.

The Jeep Heavy-Duty Standard

Engineered for off-road heat cycles and daily towing, these sensors maintain stable closed-loop fuel control under heavy load. Sealed housings resist moisture intrusion and keep your XJ running clean.




Mueble

Hacer

Jeep

Tamaño del motor

  • 4.0L

Año

  • 1996
  • 1997
  • 1998
  • 1999
  • 2000

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Jeep Cherokee (1996-2000) 4.0L

$37.95