O2 Oxygen Sensor Upstream Downstream for Honda Civic (2006-2010) 1.3L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2006-2010 Honda Civic (FA3)
What it Does: This matched upstream and downstream oxygen (O2) sensor kit for the 2006-2010 Honda Civic (FA3) LDA2 1.3L monitors exhaust air-fuel ratios and catalytic converter efficiency to maintain closed-loop ECU fuel trim control.
The Stock Honda Civic Sensor Degradation
Factory oxygen sensors on the FA3 chassis equipped with the LDA2 1.3L engine endure extreme thermal cycling, exhaust soot, and moisture contamination over high mileage. The internal zirconia ceramic element and platinum electrodes eventually suffer thermal shock or silicone poisoning, slowing voltage switching response. Additionally, internal heater circuit elements frequently burn out from sustained heat soak near the exhaust manifold. When either sensor drifts out of spec, the ECU loses accurate feedback, triggering P0134, P0135, or P0141 fault codes.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & Circuit DTCs: Illuminated MIL storing codes such as P0134 (no activity), P0135/P0141 (heater circuit malfunction), P0171 (system too lean), or P0420 catalyst efficiency faults.
- Sluggish Throttle & Rough Idle: Delayed air-fuel sensor voltage response causes erratic closed-loop fuel trims, lean hesitation, or unstable idle during stop-start hybrid operation.
- Excessive Fuel Burn & Failed Emissions: Defaulting to rich open-loop fuel maps reduces mileage, fouls spark plugs, and causes tailpipe hydrocarbon failures during emissions testing.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
Replacing both sensors as a matched set restores balanced pre-cat air-fuel metering and post-cat monitoring on your FA3 Civic. Built to match OEM specification 36531RMXA01, each sensor features a high-purity zirconia ceramic sensing element inside a corrosion-resistant stainless steel housing for rapid light-off and stable signal voltage. Precision laser-welded seams prevent exhaust gas or moisture intrusion into the reference air chamber. Factory-style plug-and-play connectors and OEM-length harnesses allow direct bolt-on installation without cutting or splicing vehicle wiring.
What's Included
- 1 Upstream Oxygen Sensor
- 1 Downstream Oxygen Sensor
Technical Specifications
| Fitment | 2006-2010 Honda Civic |
|---|---|
| Engine / Chassis | LDA2 1.3L / FA3 |
| Emissions & Sensor Spec | Direct-Fit Heated Zirconia O2 Sensors (Upstream & Downstream) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 36531RMXA01 |
Compatibility
- 2006-2010 Honda Civic 1.3L (FA3 Chassis / LDA2 Engine)
Frequently Asked Questions & Fitment Warnings
Does this fit the FA3 Civic?
Yes. This is a direct fit for the 2006-2010 Honda Civic equipped with the LDA2 1.3L engine. Does not fit 1.8L (R18A1) or 2.0L (K20Z3) Civic engines; always confirm your 1.3L engine designation before ordering.
Will replacing both sensors clear P0135, P0141, or P0420 codes?
Yes, when caused by sensor degradation. Installing a matched upstream (36531RMXA01) and downstream set resolves faulty heater circuits and sluggish sensor response triggering P0134, P0135, and P0141. Note that a persistent P0420 code after replacement indicates a failing catalytic converter substrate.
Do these sensors require wire splicing or adapters for installation?
No. Both upstream and downstream units include direct-fit OE-style connectors and factory harness lengths for plug-and-play installation. Use a 22mm O2 sensor socket, verify exhaust bung threads are clean, and clear stored ECU fault codes after installation.
The Honda Precision Standard
Engineered for strict emissions compliance and closed-loop ECU accuracy, this matched upstream and downstream sensor kit keeps your FA3 running CEL-free. Restore factory air-fuel metering precision and consistent fuel economy with direct-fit replacement hardware.
Mueble
Mueble
|
Hacer |
Honda |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$62.95