Saltar al contenido del producto
1 de 4

O2 Oxygen Sensor Upstream Downstream for GMC Suburban (1996-1998) 5.7L



Precio regular $59.95
Precio de oferta $59.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit 4-Piece O2 Sensor Kit for 1996-1998 GMC Suburban (GMT400)

What it Does: This four-piece upstream and downstream oxygen sensor kit restores air-fuel monitoring and converter tracking on the 1996-1998 GMC Suburban GMT400 with the L31 5.7L Vortec V8.

The Stock GMC Suburban Sensor Degradation

On the GMT400 chassis equipped with the L31 5.7L Vortec V8, factory oxygen sensors endure severe exhaust heat soak, moisture condensation, and carbon fouling. As the internal zirconia sensing element ages or the heater circuit suffers resistance burnout, switching slows and voltage signals bias lean or rich. Left unreplaced, mismatched bank-to-bank readings skew closed-loop fuel trim, triggering P0135, P0141, or P0420/P0430 fault codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Stored P0135, P0155, or P0420/P0430 codes from heater burnout or slow switching.
  • Rough Idle & Hesitation: Biased upstream feedback skews fuel trim, causing stumble under load.
  • Failed Emissions & Fuel Loss: Incomplete readiness monitors and elevated fuel consumption.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

Replacing all four sensors together with this direct-fit kit—interchange reference leader83620933—keeps pre-cat and post-cat switching uniform across both banks on the L31 5.7L Vortec V8. Each sensor uses an OEM-spec connector, eliminating generic splicing and signal resistance drops. Keep grease and anti-seize off the sensing tip, thread each sensor by hand before torquing, and clear stored ECM codes prior to a drive cycle.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 1996-1998 GMC Suburban
Engine / Chassis L31 5.7L Vortec V8 / GMT400
Sensor & Emissions Spec 4-Piece Heated Zirconia (2x Upstream / 2x Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Splicing Required)
Replaces OEM Part # leader83620933

Compatibility

  • 1996-1998 GMC Suburban — 5.7L (L31 V8) — Verify year, displacement, and connector style before ordering.

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT400 Suburban?

Yes. This is a direct fit for the 1996-1998 GMC Suburban equipped with the L31 5.7L Vortec V8 engine. Excludes other engine displacements, model years, and mismatched connector styles even on identical body styles.

Will this clear P0135 or P0420/P0430 codes?

Yes, when caused by worn or heater-failed sensors. Installing all four balances pre-cat and post-cat readings so readiness monitors set after clearing codes.

Is wire splicing or anti-seize required?

No splicing is required. Direct-fit connectors plug straight into the factory harness; keep anti-seize off the sensing tip, thread by hand, and torque to spec.

The GMC Heavy-Duty Standard

Built for towing durability and high exhaust heat, fresh sensors keep your GMT400 Suburban at stoichiometric mixture under load and protect converter longevity.




Mueble

Hacer

GMC

Tamaño del motor

  • 5.7L

Año

  • 1996
  • 1997
  • 1998

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for GMC Suburban (1996-1998) 5.7L

$59.95