O2 Oxygen Sensor Upstream Downstream for Ford Ranger (2001-2011) 3.0L, 4.0L

$102.95

Envío calculado al finalizar la compra.

Pago totalmente seguro
Con la confianza de miles de personas
Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Compre con seguridad

Asegure su experiencia de compra con varios métodos de pago seguros y confiables.

Compra segura con nosotros

Direct-Fit Replacement Oxygen Sensor Set for 2001-2011 Ford Ranger (PN105)

What it Does: The oxygen sensor set replaces aged exhaust gas monitoring probes on the 2001-2011 Ford Ranger to restore factory air-fuel ratio calculations, optimize fuel trims, and eliminate emissions-related check engine lights.

The Stock Ford Ranger Sensor Degradation and Fuel Trim Drift

Exhaust gas monitoring on the PN105 chassis degrades as the factory zirconia sensing thimbles suffer chemical contamination from sustained combustion blow-by, carbon deposits, and thermal cycling. On both the 3.0L Vulcan and 4.0L Cologne SOHC engines, failing factory sensors exhibit sluggish voltage response times. This latency forces the powertrain control module (PCM) into unstable short-term and long-term fuel trim corrections (STFT/LTFT), inducing cylinder hesitation, reduced towing efficiency, poor gas mileage, and diagnostic fault codes spanning P0130 through P0161, as well as false catalytic degradation codes P0420 and P0430.

The Engineering Solution

This 4-piece sensor package delivers full bank-to-bank closed-loop feedback restoration. Built with high-temperature stainless steel protective outer housings and rapid-response internal ceramic heater elements, each sensor reaches operating temperature in seconds to minimize cold-start emissions. High-density wiring looms resist underbody radiant exhaust heat, while OEM-matched weather-pack connectors mate straight into the factory harness pins without cutting or soldering. Calibrated voltage sweeps ensure reliable downstream catalytic monitoring and millisecond-level upstream lambda detection to protect your catalytic converters and maintain balanced combustion stoichiometry.

What's Included

2 Upstream Oxygen Sensors (Pre-Catalytic Converter)
2 Downstream Oxygen Sensors (Post-Catalytic Converter)

Technical Specifications

Fitment	2001-2011 Ford Ranger
Engine / Chassis	3.0L Vulcan V6, 4.0L Cologne V6 / PN105
Stock Output	148-207 hp / 180-238 lb-ft
Replaces OEM Part #	SG1813, 234-4001, 234-4046, 234-4070, 234-4071, 234-4127, 234-4401, 22013, 22016, 22060, 22071, 22500

Compatibility

2001-2008 Ford Ranger 3.0L V6 (Vulcan)
2001-2011 Ford Ranger 4.0L V6 (Cologne SOHC)

Frequently Asked Questions & Fitment Warnings

Does this fit the PN105 Ranger?

Yes, this is a direct fit for the 2001-2011 Ford Ranger equipped with the 3.0L Vulcan or 4.0L Cologne V6 engines. It does not fit the 2.3L Duratec inline-4 engine configurations.

Do I need to splice wiring or reuse original harness clips?

No, each unit features factory-matched pigtail lengths and OEM-style multi-pin connectors for true plug-and-play installation without wire modification.

The Ford Truck Durability Standard

Built for the harsh duty cycles of light truck hauling and trail work, these sensors provide robust thermal resilience against high exhaust gas temperatures. Replacing both upstream and downstream banks simultaneously maintains balanced cylinder banks, prevents converter contamination, and restores full rated payload reliability.