O2 Oxygen Sensor Upstream Downstream for Ford Mustang (1995-2010) 3.8L, 4.0L, 4.6L, 5.0L, 5.4L

$101.95

Envío calculado al finalizar la compra.

Pago totalmente seguro
Con la confianza de miles de personas
Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Compre con seguridad

Asegure su experiencia de compra con varios métodos de pago seguros y confiables.

Compra segura con nosotros

Direct-Fit Oxygen Sensor 4-Piece Set for 1995-2010 Ford Mustang (SN95 / S197)

What it Does: The Direct-Fit Oxygen Sensor Set replaces worn factory upstream and downstream sensors on 1995-2010 Mustangs to restore precise closed-loop AFR metering and resolve diagnostic trouble codes.

The Stock Ford Mustang Sensor Contamination & Delay

Exhaust heat and chemical contamination degrade OEM zirconia thimbles over time on the SN95 and S197 platforms. Prolonged exposure to carbon blow-by and thermal cycling causes sensing elements to become sluggish, delaying the voltage transitions between 0.1V (lean) and 0.9V (rich). On Ford Modular, Windsor, Essex, and Cologne powerplants, this delayed response causes inaccurate Long Term Fuel Trims (LTFT), unburnt fuel wash, rough idle, reduced mileage, and catalytic inefficiency faults such as P0130-P0161 and P0420.

The Engineering Solution

This 4-sensor replacement kit restores factory closed-loop engine management. Constructed with dual-layer 304 stainless steel heat shields and porous ceramic zirconia planar elements, each sensor offers rapid response times and resistance to silicone contamination. Integrated rapid-fire internal heaters reach light-off operating temperature within seconds, minimizing cold-start emissions. Factory-keyed pigtail connectors, sealed weather-pack terminals, and precision M18x1.5 threaded bungs ensure direct plug-and-play installation without wire splicing.

What's Included

2 Upstream Oxygen Sensors (Pre-Catalytic Converter)
2 Downstream Oxygen Sensors (Post-Catalytic Converter)

Technical Specifications

Fitment	1995-2010 Ford Mustang
Engine / Chassis	Windsor, Essex, Cologne, Modular / SN95, S197
Stock Output	145-540 hp / 215-510 lb-ft
Replaces OEM Part #	234-4046, 234-4001, 234-4070, 234-4071, 234-4127, 234-4401, SG1807, SG1808, SG1813, SG1814, SG726, SG459

Compatibility

1995 Ford Mustang GT / Cobra 5.0L V8
1995-2004 Ford Mustang 3.8L V6
1996-2010 Ford Mustang GT 4.6L V8 (2V / 3V)
1996-2004 Ford Mustang SVT Cobra / Mach 1 4.6L 4V
2005-2010 Ford Mustang 4.0L V6
2007-2010 Ford Mustang Shelby GT500 5.4L Supercharged V8

Frequently Asked Questions & Fitment Warnings

Does this fit the SN95 and S197 Mustang?

Yes, this is a direct fit for the 1995-2010 Ford Mustang equipped with the 3.8L, 4.0L, 4.6L, 5.0L, and 5.4L engines.

Do I need to clear PCM trouble codes after replacement?

Yes, clearing DTCs with an OBD-II scan tool resets stored fuel trim tables, allowing the ECU to calibrate immediately to new sensor voltages.

The Ford Muscle Caliber

Accurate exhaust feedback is mandatory for crisp throttle response and broad-band torque across classic 5.0L pushrod and high-revving Modular V8 Mustang builds.