Saltar al contenido del producto
1 de 2

O2 Oxygen Sensor Upstream Downstream for Ford Fusion (2013-2020) 2.0L



Precio regular $59.95
Precio de oferta $59.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2013-2020 Ford Fusion (CD4)

What it Does: This matched oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen levels on the 2013-2020 Ford Fusion CD4 2.0L to maintain accurate fuel trims and emissions compliance.

The Stock Ford Fusion Sensor Failure

On the CD4 platform with the 2.0L engine, factory oxygen sensors endure extreme exhaust heat and constant thermal cycling. Over time, internal ceramic elements suffer thermal shock and carbon fouling, while internal heater circuits degrade from vibration and moisture ingress. Once sensor response slows, the PCM loses accurate air-fuel feedback, triggering persistent fault codes such as P0135, P0141, and P0420.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Codes P0135, P0141, or P0171 from open heater circuits or sluggish voltage switching.
  • Poor Fuel Economy: Skewed upstream feedback forces rich or lean fuel trims, increasing fuel consumption.
  • Rough Idle & Emissions Failure: Delayed closed-loop fueling causes cold-start stumbling and failed readiness monitors.

The Direct-Fit Matched Sensor Solution

Replacing both sensors as a matched set restores synchronized exhaust feedback across the 2.0L exhaust stream. Each direct-fit unit uses a laser-welded stainless housing, high-temperature ceramic sensing element, and durable internal heater built for severe heat soak. Factory-style connectors plug straight into the CD4 wiring harness without splicing, directly matching 234-5068 and 234-4578 specifications to ensure reliable closed-loop operation.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2013-2020 Ford Fusion
Engine / Chassis 2.0L / CD4
Sensor Architecture Direct-Fit Heated Upstream & Downstream Kit
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5068, 234-4578

Compatibility

  • 2013-2020 Ford Fusion 2.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the CD4 Fusion?

Yes. This fits the 2013-2020 Ford Fusion with the 2.0L engine. Excludes 1.5L, 1.6L, 2.5L, and 2.7L models; confirm your engine before ordering.

Will this clear P0135 or P0141 heater codes?

Yes. Replacing both sensors resolves P0135/P0141 heater faults when harness wiring is intact. Clear stored DTCs after installation so the PCM resets fuel trims.

Are OEM-style connectors included for installation?

Yes. Both sensors include pre-wired OEM-style plugs for direct CD4 harness installation. Apply anti-seize only to threads and torque to spec.

The Ford Precision Standard

Built to restore factory emissions compliance and ECU accuracy on your CD4 sedan. Enjoy crisp throttle response and CEL-free driving.




Mueble

Hacer

Ford

Tamaño del motor

  • 2.0L

Año

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • 2020

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Ford Fusion (2013-2020) 2.0L

$59.95