O2 Oxygen Sensor Upstream Downstream for Ford E-Series (2005-2008) 5.4L 6.8L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Direct-Fit Upstream & Downstream O2 Sensor Kit for 2005-2008 Ford E-Series (VN1)
What it Does: This 4-piece oxygen sensor kit monitors pre- and post-catalyst exhaust gases on 2005-2008 VN1 Ford E-Series vans with 5.4L and 6.8L Triton engines to regulate air-fuel ratio and catalyst efficiency.
The Stock Ford E-Series Oxygen Sensor Failure
Factory narrowband sensors on the VN1 platform endure intense exhaust heat under heavy payload and towing loads, degrading the internal zirconia element. Carbon soot, oil vapor, or moisture intrusion slows voltage cross-counts and fractures internal ceramic heater circuits. When the PCM logs sluggish response or open heater resistance on 5.4L or 6.8L engines, it sets P0135, P0155, or P0133 codes and forces rich open-loop fueling.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / Heater DTCs: Codes P0135, P0141, P0155, or P0161 indicate failed heater circuits; P0133 flags slow switching.
- Skewed Fuel Trims: Contaminated tips send false lean data, causing P0171/P0174 codes, rough idle, and hesitation.
- Failed Emissions & Poor MPG: Rich open-loop operation wastes fuel and overheats converters, triggering P0420/P0430 faults.
The Direct-Fit Heated Zirconia O2 Sensor Solution
This 4-sensor kit replaces both upstream and downstream positions simultaneously as a matched set. Each unit features a fast-response planar zirconia sensing element housed in a laser-welded stainless steel body to resist thermal shock. OEM-style weatherproof connectors and factory-length harnesses plug directly into 5.4L and 6.8L wiring without splicing. Pre-coated anti-seize threads ensure clean installation into factory exhaust bungs without thread galling.
What's Included
- 2 Upstream Oxygen Sensors
- 2 Downstream Oxygen Sensors
Technical Specifications
| Fitment | 2005-2008 Ford E-Series |
|---|---|
| Engine / Chassis | 5.4L / 6.8L Triton / VN1 |
| Emissions & Sensor Type | 4-Wire Heated Zirconia / Direct-Fit |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
Compatibility
- 2005-2008 Ford E-Series 5.4L
- 2005-2008 Ford E-Series 6.8L
Frequently Asked Questions & Fitment Warnings
Does this fit the VN1 E-Series?
Yes. Fits 2005-2008 VN1 Ford E-Series with 5.4L or 6.8L gasoline engines. Excludes 6.0L diesel models; confirm engine before ordering.
Will this clear P0135/P0155 and P0141/P0161 codes?
Yes. Replacing all four sensors restores heater resistance and switching speed, clearing P0135, P0141, P0155, and P0161 after a scanner reset.
Is wire splicing required for installation?
No. Direct-fit OEM connectors plug straight in; apply provided thread anti-seize carefully and torque to factory specification.
The Ford Heavy-Duty Standard
Built for commercial vans and heavy towing, these matched sensors withstand sustained exhaust heat to maintain precise fuel trim control. Restore reliable closed-loop operation and emissions compliance across every mile.
Mueble
Mueble
Garantía
Garantía
