Saltar al contenido del producto
1 de 2

O2 Oxygen Sensor Upstream Downstream for Chevrolet Traverse (2018-2023) 3.6L



Precio regular $104.95
Precio de oferta $104.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2018-2023 Chevrolet Traverse (C1XX)

What it Does: This 4-piece oxygen sensor kit for the 2018-2023 Chevrolet Traverse (C1XX) 3.6L LFY V6 measures pre- and post-catalyst exhaust oxygen to maintain stoichiometric fuel trim and verify converter efficiency.

The Stock Chevrolet Traverse Sensor Failure

On the C1XX equipped with the LFY 3.6L V6, factory O2 sensors endure severe exhaust heat soak, thermal shock, and carbon fouling. Over time, the zirconia sensing element degrades or internal heater circuits fail, slowing voltage switching across Bank 1 and Bank 2. Leaving a worn partner sensor installed skews closed-loop fuel trim and triggers P0130, P0150, or P0420/P0430 codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Heater burnout or slow switching triggers P0135, P0141, or P0420/P0430.
  • Rough Idle & Hesitation: Biased signals disrupt closed-loop fuel trim under load.
  • Higher Fuel Use & Failed Emissions: Fuel drift increases consumption and blocks readiness monitors.

The Direct-Fit Oxygen Sensor Solution

This 4-piece kit services both upstream and downstream positions simultaneously, keeping air-fuel feedback consistent from bank to bank and pre-cat to post-cat. Built to match OEM numbers 2348054, 12667438, 12666672, 12670253, and 21084, each unit features factory-style connectors for plug-and-play installation without splicing. Keep grease off the sensing tip, hand-thread before torquing, and complete a drive cycle to set monitors.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2018-2023 Chevrolet Traverse
Engine / Chassis 3.6L LFY V6 / C1XX
Sensor Configuration 2 Upstream (Pre-Cat) & 2 Downstream (Post-Cat) / Direct-Fit
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 2348054, 12667438, 12666672, 12670253, 21084

Compatibility

  • 2018-2023 Chevrolet Traverse 3.6L V6 (C1XX)

Frequently Asked Questions & Fitment Warnings

Does this fit the C1XX Traverse?

Yes. Direct fit for the 2018-2023 Chevrolet Traverse with the 3.6L LFY V6 engine. Excludes non-3.6L engines and other model years; confirm displacement and connector style before ordering.

Will this clear P0420/P0430 or fuel-trim codes?

Yes, when sensors are at fault. Replacing all four units restores ECM switching on the LFY 3.6L; clear codes and complete a drive cycle afterward.

Is wire splicing required during installation?

No. Direct-fit connectors plug into the factory harness; keep anti-seize off the sensing tip, hand-thread first, and torque to spec.

The Chevrolet Precision Standard

Built for accurate ECM fuel-trim control and emissions readiness, this matched four-sensor kit restores balanced combustion across both banks. Count on reliable monitor completion and CEL-free operation for your C1XX Traverse.




Mueble

Hacer

Chevrolet

Tamaño del motor

  • 3.6L

Año

  • 2018
  • 2019
  • 2020
  • 2021
  • 2022
  • 2023

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Chevrolet Traverse (2018-2023) 3.6L

$104.95