Saltar al contenido del producto
1 de 4

O2 Oxygen Sensor Upstream Downstream for Chevrolet Silverado (2010-2013) 4.3L



Precio regular $142.95
Precio de oferta $142.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2010-2013 Chevrolet Silverado (GMT900)

What it Does: This 4-piece upstream and downstream oxygen sensor kit monitors exhaust air-fuel ratios and catalyst efficiency on the 2010-2013 GMT900 Chevrolet Silverado with the LU3 4.3L V6 to maintain closed-loop fuel trim control.

The Stock Chevrolet Silverado Sensor Degradation

Factory zirconia sensing elements on the GMT900 Silverado equipped with the LU3 4.3L V6 degrade from continuous thermal cycling, exhaust soot, and silicone contamination. Over time, internal heater circuits burn out and electrode response slows, feeding inaccurate voltage data to the ECM. This sluggish switching triggers fuel trim drift and sets active OBD-II fault codes including P0135, P0155, P0171, and P0420.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Active P0131, P0135, P0155, or P0420 codes from slow switching or open heater circuits.
  • Poor Fuel Economy: ECM defaults to rich open-loop fueling when upstream sensors fail to oscillate.
  • Rough Idle & Emissions Failure: Erratic fuel trims cause unstable idle and elevated tailpipe hydrocarbons.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

This matched four-sensor kit restores crisp millivolt signal response across Bank 1 and Bank 2 upstream and downstream exhaust bungs on the LU3 4.3L platform. Each unit features a laser-welded stainless steel protective shield, high-temperature ceramic zirconia element, and calibrated internal heater for rapid light-off. Factory-style 4-wire weatherpack connectors and threaded shells enable direct plug-and-play installation without splicing OEM harness wiring.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2010-2013 Chevrolet Silverado
Engine / Chassis LU3 4.3L V6 / GMT900
Sensor Architecture Heated Zirconia / Upstream & Downstream (4-Sensor Set)
Installation Type Direct Plug-In OEM Replacement (No Splicing)

Compatibility

  • 2010-2013 Chevrolet Silverado 4.3L

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT900 Silverado?

Yes. Direct fit for 2010-2013 Chevrolet Silverado models with the LU3 4.3L V6. Excludes all V8 engines; confirm engine before ordering.

Will this clear P0135, P0155, or P0171 codes?

Yes, if sensors are faulty. Replacing all four GMT900 sensors restores accurate voltage feedback, though wiring and exhaust leaks should be checked first.

Are OEM connectors included for installation?

Yes. All four sensors feature direct-fit plugs and standard threads; avoid contaminating sensor tips during installation.

The Chevrolet Heavy-Duty Standard

Built for sustained exhaust heat under load, this matched sensor kit keeps your GMT900 truck operating at peak efficiency with clean closed-loop fuel control.




Mueble

Hacer

Chevrolet

Tamaño del motor

  • 4.3L

Año

  • 2010
  • 2011
  • 2012
  • 2013

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Chevrolet Silverado (2010-2013) 4.3L

$142.95