Saltar al contenido del producto
1 de 5

O2 Oxygen Sensor Upstream Downstream for Buick Regal (2011-2015) 2.4L



Precio regular $51.95
Precio de oferta $51.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2011-2015 Buick Regal (Epsilon II)

What it Does: This upstream and downstream O2 sensor kit for the 2011-2015 Buick Regal Epsilon II (LAF/LEA 2.4L Ecotec) monitors exhaust oxygen for accurate fuel trim and catalyst checks.

The Stock Buick Regal Sensor Failure

On the Epsilon II Regal with the LAF/LEA 2.4L Ecotec, OEM oxygen sensors endure severe exhaust heat soak, thermal cycling, and carbon contamination. Over time, the zirconia sensing element turns sluggish or biased while internal heater circuits fracture from repeated cold-start cycling. Replacing both units together prevents a worn partner sensor from skewing fuel trims and causing codes like P0135, P0141, and P0420.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Codes like P0135 or P0141 triggered by open heater circuits or slow sensor switching.
  • Drivability Issues: Rough idle, throttle hesitation, and delayed closed-loop fueling under load.
  • Emissions & Economy Loss: Higher fuel consumption, failed emissions tests, or P0420 readiness failures.

The Direct-Fit Oxygen Sensor Solution

Engineered as a matched two-piece direct-fit set replacing 12622308 and 25024698, this kit restores rapid pre-cat and post-cat exhaust feedback. Each sensor features a fast-light-off zirconia element inside a corrosion-resistant stainless housing paired with factory-length leads and OEM-style weatherproof connectors. Precision-cut threads allow clean bolt-in installation without splicing, restoring ECM fuel-trim authority and catalyst readiness monitoring.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2011-2015 Buick Regal
Engine / Chassis LAF/LEA 2.4L Ecotec / Epsilon II
Stock Engine Output 182 hp / 172 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 12622308, 25024698

Compatibility

  • 2011-2015 Buick Regal (2.4L Engine Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the Epsilon II Regal?

Yes. Direct fit for the 2011-2015 Buick Regal with the LAF/LEA 2.4L Ecotec engine. Confirm engine, year, and connector style; 2.0L Turbo models are excluded.

Will this resolve P0135, P0141, and fuel-trim codes?

Yes, if sensors are degraded. Replacing both restores P0135/P0141 heater function and switching speed; clear codes and complete a drive cycle.

Is splicing or special prep needed for installation?

No splicing is required. Direct-fit connectors match factory harnesses; keep grease off the tip, hand-thread first, and torque to spec.

The Buick Precision Standard

Built for factory ECM accuracy on the Epsilon II platform, this matched upstream and downstream kit prevents mixed-sensor bias. Maintain clean fuel trims and CEL-free emissions compliance.




Mueble

Hacer

Buick

Tamaño del motor

  • 2.4L

Año

  • 2011
  • 2012
  • 2013
  • 2014
  • 2015

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Buick Regal (2011-2015) 2.4L

$51.95