Saltar al contenido del producto
1 de 2

O2 Oxygen Sensor Upstream Downstream for Buick LaCrosse (2010-2016) 3.6L



Precio regular $89.95
Precio de oferta $89.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2010-2016 Buick LaCrosse (Epsilon II)

What it Does: This 4-piece O2 sensor kit monitors pre- and post-catalyst exhaust oxygen on the 2010-2016 Buick LaCrosse Epsilon II (LLT / LFX 3.6L V6) to maintain closed-loop fuel precision.

The Stock Buick LaCrosse Oxygen Sensor Failure

Factory oxygen sensors on the Epsilon II endure severe exhaust thermal cycling from the high-compression LLT / LFX 3.6L V6. Over time, zirconia sensing elements suffer thermal shock and carbon fouling, while internal heater circuits fatigue from cold-start current loads. Slowed switching response causes the ECM to lose accurate fuel trim control, triggering diagnostic trouble codes such as P0135, P0155, and P0420/P0430.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0135, P0155, or P0171/P0174 from open heater circuits or sluggish voltage switching.
  • Poor Fuel Economy: Open-loop fuel enrichment increases consumption and accelerates exhaust carbon fouling.
  • Rough Idle & Emissions Failure: Erratic air-fuel feedback destabilizes idle trims and triggers catalyst codes (P0420/P0430).

The Direct-Fit Heated Zirconia Sensor Solution

This matched four-sensor set replaces both upstream air-fuel and downstream catalyst-monitoring sensors on the LLT / LFX 3.6L V6. Each unit features a laser-welded stainless steel housing, protective sensor shield, and fast-acting internal heater calibrated to match OEM tolerances for 12584050, 12607333, 12612430, and 12634061. Factory-style plug-and-play connectors and exact-length wire harnesses eliminate splicing and ensure reliable, direct-fit installation.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2010-2016 Buick LaCrosse
Engine / Chassis LLT / LFX 3.6L V6 / Epsilon II
Sensor Architecture Direct-Fit Heated Zirconia (Upstream & Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 12584050, 12607333, 12612430, 12634061

Compatibility

  • 2010-2016 Buick LaCrosse 3.6L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the Epsilon II LaCrosse?

Yes. Fits 2010-2016 Buick LaCrosse models with the LLT / LFX 3.6L V6 engine. Excludes 2.4L I4 and 3.0L V6 trims; confirm engine before ordering.

Will this clear P0135/P0155 codes and replace all four sensors?

Yes. Replacing all four probes restores heater continuity and switching speed for 12584050, 12607333, 12612430, and 12634061 circuits once exhaust leaks are ruled out.

Are factory connectors included for installation?

Yes. Direct-fit plugs install with no splicing; clean manifold threads and torque to OEM specification.

The Buick Precision Standard

Built for closed-loop ECM accuracy and emissions compliance, this matched sensor kit restores crisp air-fuel control on your Epsilon II LaCrosse. Thermal durability keeps your 3.6L V6 running clean and CEL-free.




Mueble

Hacer

Buick

Tamaño del motor

  • 3.6L

Año

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Buick LaCrosse (2010-2016) 3.6L

$89.95