Intercooler for BMW 3 Series (2012-2015) 2.0L 3.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
High-Efficiency EVO II Front-Mount Intercooler for 2012-2015 BMW 3 Series (F30/F31/F34)
What it Does: The EVO II front-mount intercooler replaces the undersized factory charge-air cooler on the 2012-2015 BMW 3 Series to dramatically reduce intake air temperatures and prevent ECU timing pull under boost.
The Stock BMW 3 Series Heat Soak Limitation
The factory cooling assembly on F30 chassis models relies on a lightweight tube-and-fin core clamped to plastic end tanks. Under consecutive wide-open-throttle pulls or track conditions, the OEM unit suffers severe thermal saturation. As charge-air temperatures spike, the Bosch DME safety logic retards ignition timing and bleeds boost pressure to mitigate pre-detonation, resulting in noticeable power loss on both N20 and N55 platforms.
The Engineering Solution
Engineered with an expanded stepped-core profile, this upgrade significantly maximizes internal volume and thermal mass over stock dimensions. Heavy-duty cast aluminum end tanks are robotically TIG-welded to the core, eliminating the risk of crimped tank separation at elevated boost levels. The internal bar-and-plate architecture promotes uniform laminar flow across the cooling matrix while integrating OEM-style quick-disconnect charge pipe junctions for a sealed, leak-free transition.
What's Included
- 1 x Front-Mount Stepped Core Intercooler
Technical Specifications
| Fitment | 2012-2015 BMW 3 Series |
|---|---|
| Engine / Chassis | N20 (2.0L) & N55 (3.0L) / F30, F31, F34 |
| Stock Output | 180-300 hp / 200-300 lb-ft |
| Replaces OEM Part # | 03CSI062ASL |
Compatibility
- 2012-2015 BMW 320i (F30/F31/F34) 2.0L Turbo N20
- 2012-2015 BMW 328i (F30/F31/F34) 2.0L Turbo N20
- 2012-2015 BMW 335i (F30/F34) 3.0L Turbo N55
Frequently Asked Questions & Fitment Warnings
Does this fit the F30 3 Series?
Yes, this is a direct fit for the 2012-2015 BMW 3 Series equipped with the N20 2.0L or N55 3.0L turbo engine. Does not fit naturally aspirated models, diesel variants, or newer B48/B58 platforms.
Are mounting brackets or hardware included?
Mounting fittings and installation hardware are not included; this unit retains the factory lower mounting points and clip-style charge piping.
The BMW Precision Standard
Designed to integrate seamlessly into modern European engine architecture, this cooling unit stabilizes manifold temperatures to deliver consistent output without triggering diagnostic trouble codes or check engine lights.
Mueble
Mueble
Garantía
Garantía
