Ignition Coil & Spark Plugs for Lincoln MKT MKX (2016-2018) 3.7L V6
No se pudo cargar la disponibilidad de retiro
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Direct-Replacement Ignition Coil & Spark Plugs for 2016-2018 Lincoln MKT, MKX
Restores optimal combustion and eliminates misfires by replacing degraded OEM ignition components. This complete kit provides six direct-fit ignition coils and six premium platinum spark plugs designed specifically for the 3.7L Cyclone V6 engine.
The Stock MKT, MKX Ignition Weakness
Over time, the factory ignition system on the 3.7L Cyclone engine is highly susceptible to thermal degradation and voltage leaks. Prolonged exposure to extreme engine bay temperatures causes the epoxy resin inside the OEM ignition coils to crack, leading to internal short circuits and a weakened spark. Paired with standard spark plug electrode wear, this thermal breakdown results in rough idling, delayed throttle response, inconsistent fuel economy, and cylinder misfire codes (P0300-P0306) that compromise overall engine efficiency and drivability.
The Engineering Solution
This comprehensive ignition kit engineered for the D4 and CD4 chassis directly targets these common electrical failures. The upgraded ignition coils are wound with high-conductivity copper wiring and housed in a heat-resistant, high-dielectric polymer casing to prevent voltage leakage and withstand extreme heat cycles. Paired with platinum-grade spark plugs, the system ensures a highly focused, consistent spark across all RPM ranges. The platinum center electrode resists erosion significantly better than traditional copper, maximizing service life while restoring factory power delivery, stabilizing idle characteristics, and maintaining optimal fuel atomization for the Cyclone V6.
Technical Specifications
| Fitment | 2016-2018 Lincoln MKT, MKX |
| Engine / Chassis | 3.7L Cyclone V6 / D4, CD4 |
| Stock Output | 303 hp / 278 lb-ft (Approx) |
| Part Number | IC78051174067810052006 (Cross: 7T4Z12029F, IC930) |
Compatibility
- 2016 Lincoln MKT 3.7L V6
- 2017 Lincoln MKT 3.7L V6
- 2018 Lincoln MKT 3.7L V6
- 2016 Lincoln MKX 3.7L V6
- 2017 Lincoln MKX 3.7L V6
- 2018 Lincoln MKX 3.7L V6
The Lincoln Calibration Standard
Designed for absolute precision, this ignition kit guarantees a clean install with no persistent CEL (Check Engine Light) issues, returning your luxury crossover to its smooth, factory-intended operational baseline.
Mueble
Mueble
Garantía
Garantía
