Ignition Coil & Spark Plugs for Ford Ranger (2001-2011) 4.0L V6
No se pudo cargar la disponibilidad de retiro
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Reliable Ignition Coil & Spark Plugs for 2001-2011 Ford Ranger
What it does: Replaces worn factory ignition components to restore optimal spark timing, prevent misfires, and improve fuel combustion in the 4.0L Cologne V6.
The Stock Ranger Ignition Shortcomings
The stock Ford Cologne 4.0L SOHC V6 ignition coil pack is notorious for thermal degradation over time. Positioned in a high-heat zone of the engine bay, the internal epoxy potting of the OEM coil pack breaks down, leading to micro-cracking in the housing. This allows moisture intrusion and secondary voltage leakage, which manifests as a rough idle, hesitation under load, and random cylinder misfires (commonly throwing P0300 to P0306 DTCs). Additionally, factory spark plugs experience electrode erosion after 60,000 miles, increasing the required firing voltage and putting further thermal stress on the aging coil pack, ultimately reducing powertrain efficiency.
The Engineering Solution
This replacement ignition kit directly addresses these thermal and electrical vulnerabilities. The upgraded coil pack utilizes high-dielectric epoxy and reinforced thermal-resistant polymer housings to prevent cracking and electrical arcing under severe engine temperatures. Internal copper windings are optimized for lower primary resistance, ensuring a hotter, more consistent spark across the rpm range. Paired with 6x genuine Motorcraft spark plugs featuring precision-welded electrodes, this setup guarantees complete combustion chamber ignition. The resulting spark stability eliminates engine hesitation, stabilizes manifold vacuum at idle, and restores factory throttle response without requiring ECU recalibration.
Technical Specifications
| Fitment | 2001-2011 Ford Ranger |
| Engine / Chassis | 4.0L Cologne SOHC V6 / PN105 |
| Stock Output | 207 hp / 238 lb-ft (Approx) |
| Part Number | 90TF12029A1A, E9DF12029AA, E9DZ12029A, F0TZ12029A, F1DZ12029A, F57U12029AA, F57Z12029A, F57Z12029B, F82U12029AA, FOTZ12029A |
Compatibility
- 2001-2011 Ford Ranger 4.0L V6 XLT
- 2001-2011 Ford Ranger 4.0L V6 FX4
- 2001-2011 Ford Ranger 4.0L V6 Sport
- 2001-2005 Ford Ranger 4.0L V6 Edge
- 2004-2004 Ford Ranger 4.0L V6 Tremor
The Ford Durability Standard
Built for the long haul, this ignition kit ensures your Ranger retains the rugged dependability and hauling capacity required for demanding workloads, cold starts, and off-road environments.
Mueble
Mueble
Garantía
Garantía
