Ignition Coil and Iridium Spark Plugs for Ford F-150 (2010-2014) 6.2L

Direct-Replacement Ignition Coil and Iridium Spark Plug Kit for 2010-2014 Ford F-150

What it Does: The Ignition Coil and Iridium Spark Plug Kit restores primary and secondary combustion energy on the 2010-2014 Ford F-150 to eliminate misfires, stabilize idle, and maximize heavy-load towing efficiency.

The Stock Ford F-150 Dielectric Breakdown

The factory coil-on-plug assemblies on the 6.2L Boss V8 endure severe thermal cycling and sustained underhood heat soak on the P415 chassis. Over time, OEM boots develop micro-fissures and dielectric insulation degradation, allowing secondary voltage to arc to ground rather than across the plug gap. Combined with electrode erosion on aging plugs, required firing voltage increases sharply, inducing under-load spark blowout, hesitation during hard acceleration, and catalyst-damaging misfires.

The Engineering Solution

This complete ignition refresh kit replaces tired components with heavy-duty pencil coils and fine-wire iridium spark plugs. Coils feature precision-wound copper secondary windings encased in vacuum-potted epoxy to eradicate internal voids and prevent voltage leak. High-temp silicone boots resist thermal hardening and valve cover oil contamination. Paired with laser-welded iridium spark plugs that maintain stable spark gaps under high cylinder pressure, this kit restores instantaneous flame-front propagation and sharp throttle response without ECU calibration.

Technical Specifications

Compatibility

• 2010-2014 Ford F-150 SVT Raptor 6.2L V8
• 2011-2014 Ford F-150 Lariat 6.2L V8
• 2011-2014 Ford F-150 Platinum 6.2L V8
• 2011-2012 Ford F-150 Harley-Davidson Edition 6.2L V8

Frequently Asked Questions

Does this fit the P415 F-150?
Yes, this is a direct fit for the 2010-2014 Ford F-150 equipped with the 6.2L Boss V8 engine.

Do these iridium spark plugs require re-gapping before installation?
Plugs arrive factory pre-gapped, though verifying gap against factory 0.041-0.047 inch specifications with a feeler gauge prior to install is recommended.

The Ford Towing Standard

Engineered to withstand the demanding duty cycles of towing and off-road use, this direct-fit ignition kit ensures reliable combustion chamber ignition under sustained load and high manifold pressure.