Hubcentric Wheel Spacer Kit for Land Rover Defender (2019-2024) 25mm
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Precision Hubcentric 25mm Wheel Spacer Kit for 2019-2024 Land Rover Defender (L663)
What it Does: The Hubcentric 25mm Wheel Spacer Kit increases axle track width by 50mm on the 2019-2024 Defender to eliminate inner tire rub against suspension uprights and enhance off-camber chassis stability.
The Stock Land Rover Defender Track Width Limitation
Factory wheel offsets on the L663 chassis severely limit tire size upgrades. Running aggressive all-terrain tires causes the inner sidewalls to scrub against front suspension knuckles and air suspension bellows. Furthermore, the tall center of gravity creates body roll and reduced track stability when traversing uneven trail ruts.
The Engineering Solution
Machined from aerospace-grade 7075-T6 billet aluminum, this 25mm spacer kit widens the stance by a combined 50mm across the axle. Precision CNC machining matches the vehicle's exact 5x120 bolt pattern and 72.6mm center bore. The hub-centric snout design transfers dynamic cornering and impact loads directly to the wheel hub rather than putting shear load on the wheel studs. A hard-anodized finish prevents galvanic corrosion between the steel hub assembly and alloy wheels.
What's Included
- Hubcentric 25mm wheel spacer kit
Technical Specifications
| Fitment | 2019-2024 Land Rover Defender |
|---|---|
| Engine / Chassis | Ingenium / L663 |
| Stock Output | 395 hp / 406 lb-ft |
| Replaces OEM Part # | N/A |
Compatibility
- 2019-2024 Land Rover Defender 90 (5x120 x 72.6)
- 2019-2024 Land Rover Defender 110 (5x120 x 72.6)
- 2019-2024 Land Rover Defender 130 (5x120 x 72.6)
Frequently Asked Questions & Fitment Warnings
Does this fit the L663 Defender?
Yes, this is a direct fit for the 2019-2024 Land Rover Defender equipped with the Ingenium engine family. Manufacturer fitment note: Will not fit models equipped with 18-inch wheels due to brake caliper and wheel barrel clearance.
What are the proper installation torque specifications?
Torque all spacer-to-hub hardware to factory specification (103 lb-ft / 140 Nm) with a calibrated torque wrench and re-torque after 50 miles.
The Land Rover Durability Standard
Built to handle heavy expedition gear and aggressive off-road torque loads without hub deflection, wheel runout, or vibration.
Mueble
Mueble
Garantía
Garantía
