Hubcentric Wheel Spacer Kit for Lamborghini Huracán (2015-2024) 15mm

Track-Width Billet 15mm Hubcentric Wheel Spacer Kit for 2015-2024 Lamborghini Huracán (LB724)

What it Does: The 15mm Hubcentric Wheel Spacer Kit widens the track width of the 2015-2024 Lamborghini Huracán to eliminate sunken factory wheel offset, increase lateral roll resistance, and maintain strict hub-centric balance at high speeds.

The Stock Lamborghini Huracán Inset Track Geometry

Factory wheel offsets on the LB724 chassis position the tire shoulders recessed deep within the fender wells, leaving mechanical track width unrealized. Beyond aesthetics, using generic, non-hubcentric wheel spacers introduces dangerous radial runout and high-speed harmonic vibration. Because the OEM hub registers shear loads directly through its precision centering flange, generic spacers force the lug bolts to absorb lateral suspension loads, risking thread fatigue, shear failure, and dynamic wheel wobble under aggressive cornering loads.

The Engineering Solution

Engineered from high-tensile CNC-machined billet aluminum, this 15mm spacer kit matches the exact hub bore geometry of the Huracán. The precision-machined hubcentric snout distributes rotational and lateral cornering loads directly onto the vehicle spindle assembly rather than the lug fasteners. Expanding the track by 30mm across the axle widens the footprint, lowering the chassis roll angle and optimizing tire contact patch loading during high-load cornering without disrupting factory suspension kinematics or ABS calibration.

What's Included

• Hubcentric 15mm wheel spacer kit

Technical Specifications

Compatibility

• 2015-2019 Lamborghini Huracán (LP 610-4 / LP 580-2)
• 2016-2024 Lamborghini Huracán Spyder
• 2017-2019 Lamborghini Huracán Performante
• 2019-2024 Lamborghini Huracán EVO (AWD & RWD)
• 2021-2024 Lamborghini Huracán STO
• 2022-2024 Lamborghini Huracán Tecnica
• 2023-2024 Lamborghini Huracán Sterrato

Frequently Asked Questions & Fitment Warnings

Does this fit the LB724 Huracán?

Yes, this is a direct fit for the 2015-2024 Lamborghini Huracán equipped with the 5.2L V10 engine; confirm your specific vehicle utilizes standard 5-lug bolt hubs, as center-lock wheel configurations are excluded.

What torque specifications should be used during installation?

Torque the extended wheel bolts to factory Lamborghini specifications (typically 103 lb-ft / 140 Nm) in a crisscross pattern and re-check torque after the initial 50 miles.

The Lamborghini Precision Standard

High-downforce mid-engine supercars demand strict mechanical tolerances; zero-vibration hub engagement ensures vehicle dynamics and active steering feedback remain fully intact at triple-digit speeds.