Hubcentric Wheel Spacer Kit for Audi RS7 SQ7 SQ5 RS5 (2012-2024) 15mm

Billet 15mm Hubcentric Wheel Spacer Kit for 2012-2024 Audi RS7, SQ7, SQ5, RS5 (MLB / MLB Evo)

What it Does: The Hubcentric Wheel Spacer Kit expands track width by 30mm per axle on the 2012-2024 Audi RS7, SQ7, SQ5, and RS5 to eliminate wheel tuck, clear high-performance brake calipers, and increase lateral cornering stability.

The Stock Audi RS7, SQ7, SQ5, RS5 Inset Track Limitation

Factory wheel geometry on the MLB and MLB Evo platforms relies on conservative, high-positive offsets that set the wheels deep within the fender wells. This retracted track width limits mechanical grip during high lateral load transfers and often restricts clearance when fitting oversized steel or carbon-ceramic brake packages. Standard slip-on spacers lack concentric alignment registers, causing dangerous rotational imbalance, hub stress, and steering vibration.

The Engineering Solution

Machined from aerospace-grade 7075-T6 billet aluminum, this 15mm kit provides exceptional tensile yield strength to withstand intense shear forces under dynamic load. Each spacer features an exact hubcentric center bore register matching the Audi 66.5mm hub face to ensure zero wheel runout. Weight-reduction pockets machined into the mating surface minimize unsprung rotational mass, accommodating both standard steel and recessed carbon-ceramic rotor hats. High-tensile Grade 10.9 17mm cone-seat extended lug bolts ensure full thread engagement and factory-spec clamping force.

What's Included

• 4 x Hubcentric 15mm 7075-T6 Billet Aluminum Wheel Spacers
• Grade 10.9 17mm Cone-Seat Extended Lug Bolts

Technical Specifications

Compatibility

• 2012-2024 Audi RS7
• 2012-2024 Audi SQ7
• 2012-2024 Audi SQ5
• 2012-2024 Audi RS5

Frequently Asked Questions & Fitment Warnings

Does this fit the MLB Evo RS7, SQ7, SQ5, RS5?

Yes, this is a direct fit for 2012-2024 Audi RS7, SQ7, SQ5, and RS5 models. This kit does not fit Audi Q8, RS Q8, or R8 models, which require distinct hub and bolt configurations.

What torque specifications should be used during installation?

Torque the extended Grade 10.9 lug bolts in a crisscross pattern to factory Audi chassis specifications (90 lb-ft / 120 Nm on sedans and coupes; 118 lb-ft / 160 Nm on SUVs) and re-torque after 50 to 100 miles.

The Audi Engineering Standard

Engineered to meet rigorous European highway tolerances, this direct-fit spacer kit preserves factory steering geometry while delivering optimal wheel-arch clearance without triggering dynamic sensor faults or chassis resonance.