Saltar al contenido del producto
1 de 5

High Output Alternator for Toyota Tacoma (1995-1996) 3.4L



Precio regular $236.95
Precio de oferta $236.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 140A Alternator for 1995-1996 Toyota Tacoma (VZN150/VZN170)

What it Does: This 140-amp, 12-volt alternator replaces the factory charging unit on the 1995-1996 Toyota Tacoma (VZN150/VZN160/VZN170) with the 5VZ-FE 3.4L engine to sustain battery charge under heavy electrical loads.

The Stock Toyota Tacoma Charging Bottleneck

The factory 70-amp alternator (OEM 101211-0730) on the VZN150/VZN160/VZN170 equipped with the 5VZ-FE 3.4L V6 suffers from heat soak and diode rectifier burnout under sustained electrical loads. High under-hood temperatures degrade stator insulation and accelerate carbon brush wear. Once internal resistance climbs, idle voltage drops below battery maintenance levels. Auxiliary lights, audio systems, or recovery gear quickly overwhelm the stock rectifier bridge, triggering low-voltage codes like P0562.

Common Symptoms of a Failing OEM Alternator

  • Charging DTCs: Low output voltage triggers P0562 or P0620 and illuminates the dashboard battery warning lamp.
  • Voltage Drop Under Load: Dimming headlights or idle voltage dipping below 13.2V when accessories engage.
  • Bearing Noise & Hard Starts: Growling rotor bearings and chronic undercharging causing slow starter cranking.

The High-Output 140A Alternator Solution

Made in the USA as a brand-new unit—never a rebuilt core—this 140-amp, 12-volt assembly bolts directly onto 5VZ-FE 3.4L mounts. It includes the housing, pulley, internal regulator, and heavy-duty copper windings ready for installation. Upgraded internal components sustain accessory loads while preserving OEM connector and belt geometry. Rated 140-amp output varies with engine RPM and load, requiring sound drive belts and battery cables.

What's Included

  • 1 Complete New 140-Amp Alternator (Housing, Pulley, Internal Regulator, and Windings)

Technical Specifications

Fitment 1995-1996 Toyota Tacoma
Engine / Chassis 5VZ-FE 3.4L V6 / VZN150, VZN160, VZN170
Factory Electrical Output 70 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13670, AL3283X, RM4079, 101211-0730, 210-0279

Compatibility

  • 1995-1996 Toyota Tacoma 3.4L

Frequently Asked Questions & Fitment Warnings

Does this fit the VZN150/VZN160/VZN170 Tacoma?

Yes. Direct fit for 1995-1996 Toyota Tacoma models equipped with the 5VZ-FE 3.4L engine. Excludes 2.4L/2.7L engines, hybrid powertrains, and model years outside 1995-1996; verify pulley and electrical connector before ordering.

Will this clear P0562 voltage codes and power accessories?

Yes. Replacing a failing 101211-0730 (interchange 13670, AL3283X, RM4079, 210-0279) restores stable charging voltage to clear P0562 faults and support lights, audio, and recovery gear.

What preparation is required during installation?

Inspect the drive belt, tensioner, and battery cables first. Disconnect the battery, reuse original spacers or dust covers only if compatible, torque mounting bolts to factory spec, and verify idle charging voltage with a meter.

The Toyota Heavy-Duty Standard

Engineered for off-road recovery loads and high-heat under-hood durability on first-generation 5VZ-FE pickups. Each new assembly delivers consistent charging voltage without remanufactured-core wear.




Mueble

Hacer

Toyota

Tamaño del motor

  • 3.4L

Año

  • 1995
  • 1996

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Toyota Tacoma (1995-1996) 3.4L

$236.95