Saltar al contenido del producto
1 de 4

High Output Alternator for Toyota Sequoia (2008-2018) 4.6L 5.7L



Precio regular $337.95
Precio de oferta $337.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 250A Alternator for 2008-2018 Toyota Sequoia (XK60)

What it Does: This 250-amp, 12-volt High Output Alternator is a complete bolt-on charging assembly engineered for the XK60 Toyota Sequoia (3UR-FE 5.7L and 1UR-FE 4.6L) to stabilize system voltage and support heavy auxiliary electrical loads.

The Stock Toyota Sequoia Charging Bottleneck

The factory 150-amp alternator (27060-0S020 / 104210-5090) on the XK60 Toyota Sequoia equipped with the 3UR-FE 5.7L or 1UR-FE 4.6L engine regularly fails from chronic underhood heat soak. Sustained electrical demand from recovery gear, auxiliary lighting, or audio amplifiers drives stator temperatures past factory thresholds and causes diode rectifier burnout. As internal brushes wear and rectifier diodes short, charging output collapses at idle. This voltage instability trips diagnostic codes P0562 and P0620 while starving ignition and fuel systems.

Common Symptoms of a Failing OEM Alternator

  • Charging System DTCs: Triggers P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when alternator output drops below ECM target thresholds.
  • Voltage Drop Under Load: Dimming headlights, sluggish power accessories, and erratic dash voltage readings when AC fans or auxiliary gear engage at idle.
  • Battery Drain & Hard Starting: Chronic undercharging leaves the primary battery depleted, causing slow cranking or no-start conditions after short trips.

The High-Output 250A Alternator Solution

Built in the USA as a brand-new unit—never a rebuilt core—this 250A, 12V alternator replaces 11352 and 210-0697 with high-capacity internal windings. Its complete housing, pulley, and internal voltage regulator bolt directly onto 3UR-FE and 1UR-FE mounts using factory electrical connectors. Upgraded charging capacity supports recovery gear, audio systems, and auxiliary lighting without starving the primary battery. Maintaining a sound drive belt, tensioner, and heavy-gauge battery cables ensures full output without belt slip or idle voltage drop.

What's Included

  • 1 High-Output 250A Complete Alternator Assembly (New Housing, Pulley, Voltage Regulator, and Internal Windings)

Technical Specifications

Fitment 2008-2018 Toyota Sequoia
Engine / Chassis 4.6L (1UR-FE), 5.7L (3UR-FE) / XK60
Factory Electrical Output 150 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11352, 11352-250A, 210-0697, 104210-5090, 27060-0S020

Compatibility

  • 2008-2018 Toyota Sequoia 5.7L (3UR-FE)
  • 2010-2012 Toyota Sequoia 4.6L (1UR-FE)

Frequently Asked Questions & Fitment Warnings

Does this fit the XK60 Sequoia?

Yes. This is a direct fit for the 2008-2018 Toyota Sequoia equipped with the 3UR-FE 5.7L engine and the 2010-2012 Toyota Sequoia equipped with the 1UR-FE 4.6L engine. It does not fit earlier 4.7L (2UZ-FE) Sequoia models, hybrid powertrains, or years outside the listed range; always compare the pulley and electrical connector before ordering.

Will this resolve P0562 low-voltage codes and support auxiliary accessories?

Yes. Replacing a degraded factory unit restores proper charging voltage to clear P0562 and P0620 faults while providing 250A rated capacity (actual output scales with engine speed and electrical load) for lights, audio, and recovery gear.

What installation steps and checks are required during replacement?

Disconnect the negative battery terminal before installation and inspect your serpentine belt, tensioner, and battery cables for wear. Transfer original spacers or dust covers only if compatible with the new housing, torque mounting bolts to factory specifications, and verify charging voltage at the battery with a meter after startup.

The Toyota Heavy-Duty Standard

Engineered for full-size XK60 SUVs tasked with heavy towing, overlanding, and high-draw accessory duty, this USA-built alternator delivers consistent thermal durability under sustained electrical load. Verify your underhood engine displacement and connector style prior to ordering for a direct, trouble-free charging upgrade.




Mueble

Hacer

Toyota

Tamaño del motor

  • 4.6L
  • 5.7L

Año

  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Toyota Sequoia (2008-2018) 4.6L 5.7L

$337.95