Saltar al contenido del producto
1 de 4

High Output Alternator for Toyota MR2 (1991-1992) 2.0L 2.2L



Precio regular $337.95
Precio de oferta $337.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 200A Alternator for 1991-1992 Toyota MR2 (SW20 / SW21)

What it Does: This new 200-amp, 12-volt alternator replaces the factory unit on 1991-1992 Toyota MR2 (SW20/SW21) 3S-GTE 2.0L and 5S-FE 2.2L engines to expand charging capacity.

The Stock Toyota MR2 Charging Bottleneck

The mid-engine bay of the SW20 and SW21 traps intense radiant heat around the alternator on both 3S-GTE 2.0L and 5S-FE 2.2L powertrains. Continuous heat soak degrades the factory voltage regulator and causes diode rectifier burnout or stator insulation breakdown. When output falters under load at idle, voltage drop triggers charging faults like P0562 and starves ignition and fuel circuits.

Common Symptoms of a Failing OEM Alternator

  • Voltage Faults / Warning Lamps: Battery warning light illumination or low-voltage codes like P0562 from regulator failure.
  • Voltage Drop Under Load: Dimming headlights and sluggish fans when running lighting, audio, or recovery gear.
  • Hard Starting: Weak recharge current leaving the battery discharged after routine driving.

The High-Output 200A Alternator Solution

Built in the USA as a brand-new unit—never a remanufactured core—this 200-amp, 12-volt alternator replaces OEM units including 13385, 334-1932, and 10464340. Heavy-duty internal windings, robust rectifier diodes, and an integrated regulator sustain high electrical loads from upgraded lighting, audio, or auxiliary accessories. Its matched pulley, OE-style connector, and stock-geometry housing bolt straight to factory brackets.

What's Included

  • 1x High-Output 200-Amp Alternator (Complete new unit with housing, pulley, regulator, and internal windings)

Technical Specifications

Fitment 1991-1992 Toyota MR2
Engine / Chassis 3S-GTE 2.0L, 5S-FE 2.2L / SW20, SW21
Factory Electrical Output 70-80 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13385, 13385-200A, 334-1932, AL3234X, 10464340, 210-0184

Compatibility

  • 1991-1992 Toyota MR2 2.0L (3S-GTE / SW20)
  • 1991-1992 Toyota MR2 2.2L (5S-FE / SW21)

Frequently Asked Questions & Fitment Warnings

Does this fit the SW20 / SW21 MR2?

Yes. This is a direct fit for the 1991-1992 Toyota MR2 equipped with the 3S-GTE 2.0L or 5S-FE 2.2L engine. Do not install on hybrid powertrains, other displacements, or 1993+ MR2 models, which require a separate unit.

Will this resolve P0562 voltage faults, and what should I inspect?

Yes. Replacing a worn OEM unit restores 12V charging output, provided your belt, tensioner, and battery cables are sound—a 200A unit exposes weak cables or slipping belts.

Are spacers or hardware included for installation?

No extra hardware is included. Disconnect the battery, transfer original spacers or dust covers only if reusable, torque bolts to factory spec, and verify charging voltage with a meter.

The Toyota Performance Standard

Built in the USA for high-revving mid-engine JDM platforms, this 200A alternator maintains stable system voltage from idle to redline. Depend on consistent electrical flow for OEM ignition and demanding auxiliary loads.




Mueble

Hacer

Toyota

Tamaño del motor

  • 2.0L
  • 2.2L

Año

  • 1991
  • 1992

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Toyota MR2 (1991-1992) 2.0L 2.2L

$337.95