High Output Alternator for Toyota 4Runner (2014-2022) 4.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
260-Amp High Output Alternator for 2014-2022 Toyota 4Runner (N280)
What it Does: This 260-amp, 12-volt high-output alternator replaces the factory unit on the N280 2014-2022 Toyota 4Runner with the 1GR-FE 4.0L V6 engine to supply increased charging current.
The Stock Toyota 4Runner Charging System Bottleneck
The factory 130-amp alternator (such as 27060-31190 or 104210-2860) on the N280 1GR-FE 4.0L V6 operates near maximum duty cycle when powering winches, off-road lighting, or audio amplifiers. Sustained engine-bay heat soak causes stator winding insulation breakdown and diode rectifier burnout under prolonged electrical demand. Once internal brushes wear or the voltage regulator fails, charging voltage drops at idle and the ECU triggers P0562 or P0620 fault codes.
Common Symptoms of a Failing OEM Alternator
- Check Engine / Battery Light: Triggers P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when regulator output drops.
- Voltage Drop Under Load: Dimming headlights or battery drain at idle while operating auxiliary lighting or recovery gear.
- Bearing Whine or Hard Starts: Worn rotor bearings or shorted rectifier diodes causing mechanical noise and undercharged cranking.
The High-Output 260-Amp Alternator Solution
Built as a complete new unit rather than a rebuilt core, this 260-amp alternator integrates heavy-duty internal windings, a matched regulator, and a pre-installed overdrive pulley to maximize low-RPM output. The cast housing bolts directly onto the 1GR-FE 4.0L V6 engine and replaces 27060-31190, 27060-31260, and 104210-2860 using factory mounting geometry. Pairing installation with a heavier fused main charging cable ensures full amperage reaches the battery.
What's Included
- 1x Complete New 260-Amp Alternator (Assembled housing, overdrive pulley, regulator, and internal windings)
Technical Specifications
| Fitment | 2014-2022 Toyota 4Runner |
|---|---|
| Engine / Chassis | 1GR-FE 4.0L V6 / N280 |
| Factory Electrical Output | 130 Amps / 12V |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 104210-2860, 104210-2863, 104210-2864, 27060-31190, 104211-8602, 104211-8603, 27060-31260, 104210-2840, 27060-31180 |
Compatibility
- 2014-2022 Toyota 4Runner 4.0L (N280 Chassis, 1GR-FE Engine)
Frequently Asked Questions & Fitment Warnings
Does this fit the N280 4Runner?
Yes. This is a direct fit for the 2014-2022 Toyota 4Runner equipped with the 1GR-FE 4.0L V6 engine. Excludes hybrid powertrains, other displacements, and years outside 2014-2022; verify connector and pulley match before ordering.
Will this clear P0562 codes, and can I swap my OEM pulley onto this unit?
Yes, restoring charging voltage clears P0562/P0620 codes, and no, do not swap pulleys. Replacing the installed overdrive pulley reduces idle output; a slightly shorter drive belt may be required if squealing or slipping occurs.
What is required during installation?
Disconnect the battery, transfer original spacers or dust covers only if compatible, and torque bolts to factory spec. Use a heavier fused main charging cable for full 260-amp transfer and verify charging voltage with a meter.
The Toyota Heavy-Duty Standard
Built for N280 trail rigs and tow vehicles running winches and auxiliary lighting, this 260-amp unit delivers sustained thermal durability and stable charging voltage.
Mueble
Mueble
|
Hacer |
Toyota |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$402.95