Saltar al contenido del producto
1 de 4

High Output Alternator for Subaru Forester (2006-2010) 2.5L



Precio regular $337.95
Precio de oferta $337.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 210A Alternator for 2006-2010 Subaru Forester (SG / SH)

What it Does: This 210-amp alternator replaces the factory charging unit on 2006-2010 Subaru Forester (SG / SH) 2.5L (EJ253 / EJ255) models to stabilize 12V system voltage under heavy electrical loads.

The Stock Subaru Forester Charging Bottleneck

On the SG and SH Forester equipped with the EJ253 or EJ255 2.5L engine, the factory 90-amp alternator operates near thermal limits under sustained accessory draw. Underhood heat soak degrades the internal diode rectifier and voltage regulator, while brush wear drops output at idle. Running auxiliary lights, audio gear, or recovery equipment overwhelms stock capacity, draining the battery and triggering charging faults such as P0562 and P0620.

Common Symptoms of a Failing OEM Alternator

  • Charging System DTCs: Low bus voltage sets P0562 or P0620 codes and illuminates the dash battery indicator.
  • Idle Voltage Drop: Headlights dim and electronics sag at idle as worn brushes or failed diodes restrict current.
  • Hard Starting: Inadequate charging recovery causes slow cranking and premature battery sulfation.

The High-Output 210A Alternator Solution

Manufactured in the USA as a brand-new complete unit—never a rebuilt core—this alternator outputs 210 amps at 12V to replace OEM numbers 11058, A002TG0391, and A2TG0391. Heavy-duty stator windings, an upgraded rectifier, and an integrated regulator maintain stable voltage under high auxiliary loads. Its cast housing, factory-style pulley, and OEM connector bolt directly onto 2.5L bracketry without cutting or wiring modifications.

What's Included

  • 1x Complete New 210-Amp Alternator (Assembled Housing, Pulley, Regulator, and Internal Windings)

Technical Specifications

Fitment 2006-2010 Subaru Forester
Engine / Chassis EJ253 / EJ255 2.5L / SG / SH
Factory Electrical Output 90 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11058, A002TG0391, A2TG0391

Compatibility

  • 2006-2010 Subaru Forester 2.5L (SG / SH Chassis, EJ253 / EJ255)
  • Excludes hybrid powertrains, non-2.5L displacements, and model years outside 2006-2010.

Frequently Asked Questions & Fitment Warnings

Does this fit the SG / SH Forester?

Yes. This is a direct fit for the 2006-2010 Subaru Forester equipped with the EJ253 / EJ255 2.5L engine. Excludes hybrid powertrains, other displacements, and years outside 2006-2010; verify your pulley and electrical connector before ordering.

Will this resolve P0562 codes and power auxiliary accessories?

Yes. Replacing a failing OEM unit resolves P0562 and P0620 low-voltage faults, while 210-amp capacity supports lights, audio, and recovery gear, with actual output varying by RPM and load.

What installation preparation is required?

Inspect the drive belt, tensioner, and battery cables to prevent slip or voltage drop. Disconnect the battery, reuse original spacers or dust covers only if designed to transfer, torque bolts to spec, and verify charging voltage.

The Subaru Heavy-Duty Standard

Built for SG and SH Foresters running demanding electrical accessories, this US-made alternator resists heat soak and idle voltage sag. Count on consistent 12V charging stability without sacrificing OEM bolt-on fitment.




Mueble

Hacer

Subaru

Tamaño del motor

  • 2.5L

Año

  • 2006
  • 2007
  • 2008
  • 2009
  • 2010

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Subaru Forester (2006-2010) 2.5L

$337.95