High Output Alternator for Plymouth Acclaim (1990-1995) 3.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
High-Amperage 200A Alternator for 1990-1995 Plymouth Acclaim (AA Body)
What it Does: The 200A High Output Alternator replaces the low-output factory charging unit on the 1990-1995 Plymouth Acclaim to supply reliable 12V current and eliminate idle voltage drop under heavy electrical loads.
The Stock Plymouth Acclaim Charging System Limitations
Factory alternators on the **AA platform** generate minimal idle amperage, engineered strictly to support basic stock accessories. Inside the tight engine compartment of the **6G72** 3.0L V6, radiant exhaust manifold heat rapidly degrades the factory rectifier diodes and stator insulation. When powering high-draw electrical accessories, auxiliary lighting, or modern audio equipment, the OEM unit experiences thermal saturation, dropping system voltage below 12.5V, dimming lighting circuits, and starving the engine ignition system.
The Engineering Solution
Engineered as a direct bolt-on upgrade, this 200-amp unit features heavy-gauge, high-temperature copper stator windings wound around an internally balanced, low-inertia rotor. High-grade sealed cartridge bearings minimize mechanical drag and withstand sustained high-RPM operation. Heavy-duty internal avalanche diodes and an integrated solid-state voltage regulator maintain a rock-solid 13.5V to 14.5V output across the entire rev range, resisting thermal breakdown while retaining factory bracket geometry and OE plug compatibility.
What's Included
- 1x High Output 200A Alternator (Part #13307-200A)
Technical Specifications
| Fitment | 1990-1995 Plymouth Acclaim |
|---|---|
| Engine / Chassis | 6G72 3.0L V6 / AA Body |
| Stock Output | 141 hp / 171 lb-ft |
| Replaces OEM Part # | 13307, 13307N, 13307R, AL6509X, AL6509N, 5234032, 121000-3400, 210-0142, 210-0105 |
Compatibility
- 1990 Plymouth Acclaim 3.0L V6
- 1991 Plymouth Acclaim 3.0L V6
- 1992 Plymouth Acclaim 3.0L V6
- 1993 Plymouth Acclaim 3.0L V6
- 1994 Plymouth Acclaim 3.0L V6
- 1995 Plymouth Acclaim 3.0L V6
Frequently Asked Questions & Fitment Warnings
Does this fit the AA platform Acclaim?
Yes, this is a direct fit for the 1990-1995 Plymouth Acclaim equipped with the **6G72** 3.0L V6 engine.
Do I need to upgrade the main charging cable?
To safely carry the full 200-amp capacity and prevent voltage drop, upgrading to a 4-gauge or larger main B+ charging wire and engine block ground is strongly advised.
The Plymouth Reliability Standard
Engineered to withstand demanding thermal cycles while preserving proper electrical stability across daily driving conditions.
Mueble
Mueble
Garantía
Garantía
