Saltar al contenido del producto
1 de 3

High Output Alternator for Nissan Rogue (2008-2009) 2.5L



Precio regular $297.95
Precio de oferta $297.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 200A Alternator for 2008-2009 Nissan Rogue (S35)

What it Does: This 200-amp, 12-volt alternator replaces the factory unit on the 2008-2009 Nissan Rogue (S35) QR25DE 2.5L to deliver higher charging current for accessories.

The Stock Nissan Rogue Charging Bottleneck

Factory units on the S35 chassis with the QR25DE 2.5L rely on a 110-amp design (OEM 23100-AU40D / LR1110-713C) that struggles under continuous heat soak and high electrical loads. Running near peak capacity overheats stator windings and causes premature diode rectifier burnout or regulator failure. Once internal resistance spikes, output collapses at idle, starving the ECM and accessories of stable 12V power.

Common Symptoms of a Failing OEM Alternator

  • Charging DTCs: Low output triggers P0562 (System Voltage Low) or P0620 (Generator Control Circuit).
  • Voltage Drop Under Load: Dimming lights and unstable idle voltage when running audio or auxiliary gear.
  • Rectifier & Bearing Wear: Pulley whine, burnt winding odors, and repeated battery discharge causing hard starts.

The High-Output 200A Alternator Solution

Built in the USA as a brand-new assembly—never a rebuilt core—this 200-amp unit boosts charging headroom without modifying factory brackets. Heavy-duty internal windings, a precision pulley, and an integrated regulator maintain stable 12-volt output across the RPM band. Designed to interchange with 11163, 11163N, and 11163R, the housing and connector match OEM geometry for direct bolt-in installation.

What's Included

  • 1 New 200-Amp 12V Alternator Assembly (Housing, Pulley, Regulator, and Internal Windings)

Technical Specifications

Fitment 2008-2009 Nissan Rogue
Engine / Chassis QR25DE 2.5L / S35
Factory Electrical Output 110 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement
Replaces OEM Part # 11163, LR1110-713C, 23100-AU40D, 11163N, 11163R

Compatibility

  • 2008-2009 Nissan Rogue 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the S35 Rogue?

Yes. Direct fit for 2008-2009 Nissan Rogue QR25DE 2.5L models. Excludes hybrids, other displacements, and unlisted years; compare pulley and connector first.

Will this clear P0562 or P0620 codes?

Yes. Replacing a failed 23100-AU40D unit resolves P0562 and P0620 codes caused by worn diodes or regulators while supporting higher accessory loads.

What prep is needed for installation?

Disconnect the battery, inspect the belt, tensioner, and cables to prevent voltage drop, transfer reusable spacers if applicable, and torque bolts to spec.

The Nissan Precision Standard

Made in the USA for the S35, this unit ensures stable voltage regulation under heavy electrical demand. Confirm charging voltage with a meter after startup.




Mueble

Hacer

Nissan

Tamaño del motor

  • 2.5L

Año

  • 2008
  • 2009

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Nissan Rogue (2008-2009) 2.5L

$297.95