Saltar al contenido del producto
1 de 4

High Output Alternator for Mitsubishi Montero (1998-2000) 3.5L



Precio regular $344.95
Precio de oferta $344.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

200-Amp High-Output Alternator for 1998-2000 Mitsubishi Montero (V45W)

What it Does: A 200-amp, 12-volt charging assembly for the 1998-2000 Mitsubishi Montero (V45W) 6G74 3.5L that supplies stable electrical current under heavy accessory loads.

The Stock Mitsubishi Montero Charging Bottleneck

Factory 90-amp alternators (MD317119, MD350609) on the V45W with the 6G74 3.5L V6 suffer from heat soak and diode rectifier burnout under sustained load. Auxiliary lights, recovery gear, and audio amplifiers push stock stator windings past their thermal threshold. This accelerates carbon brush wear and voltage regulator failure. Degraded rectifier bridges drop idle voltage below 13.2V and trigger P0562 or P0563 codes.

Common Symptoms of a Failing OEM Alternator

  • Fault Codes: Stored P0562 (Low Voltage) or P0563 (High Voltage) from regulator failure.
  • Voltage Drop: Dimming lights and sub-13.0V readings when accessories or recovery gear engage.
  • Hard Starting: Undercharged batteries paired with whining from worn rotor bearings.

The High-Output Direct-Fit Alternator Solution

Built in the USA as a new 200-amp, 12-volt unit, this assembly replaces the stock A3TA1191A generator without rebuilt-core compromises. Heavy-duty stator windings, upgraded rectifier diodes, and an internal regulator deliver higher amperage within the OEM footprint. Its assembled housing, pulley, and connector bolt directly to 6G74 bracketry. Pair it with an inspected belt, tensioner, and battery cables to prevent slip or voltage drop.

What's Included

  • 1 Complete 200-Amp Alternator (Housing, Pulley, Regulator, and Internal Windings)

Technical Specifications

Fitment 1998-2000 Mitsubishi Montero
Engine / Chassis 6G74 3.5L V6 / V45W
Factory Electrical Output 90 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13786, RM3704, RM3745, 210-4171, A3TA1191A, A003RA1191A, MD317119, MD350609

Compatibility

  • 1998-2000 Mitsubishi Montero (3.5L 6G74 / V45W)

Frequently Asked Questions & Fitment Warnings

Does this fit the V45W Montero?

Yes. Fits 1998-2000 Mitsubishi Montero models with the 6G74 3.5L engine. Excludes hybrid powertrains, other displacements, and years outside 1998-2000; verify pulley and connector before ordering.

Will this clear P0562 codes and power accessories?

Yes. Its 200-amp capacity replaces failing MD317119 units to eliminate P0562 low-voltage faults, though actual output varies with RPM and load.

What installation steps are required?

Prep belt and cables. Disconnect the battery, transfer spacers or dust covers only if designed to reuse, torque bolts to spec, and verify charging voltage.

The Mitsubishi Heavy-Duty Standard

Built in the USA for trail recovery and thermal durability, this unit keeps your V45W charging system stable under load. Verify battery voltage after startup for dependable operation.




Mueble

Hacer

Mitsubishi

Tamaño del motor

  • 3.5L

Año

  • 1998
  • 1999
  • 2000

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Mitsubishi Montero (1998-2000) 3.5L

$344.95