Saltar al contenido del producto
1 de 5

High Output Alternator for Mazda MX-6 (1993) 2.5L



Precio regular $337.95
Precio de oferta $337.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

200-Amp High Output Alternator for 1993 Mazda MX-6 (GE)

What it Does: This new 200-amp, 12-volt alternator replaces the factory charging unit on the 1993 Mazda MX-6 (GE) KL-DE 2.5L V6 to supply higher electrical current.

The Stock Mazda MX-6 Charging System Bottleneck

On the GE chassis with the KL-DE 2.5L V6, the factory 90-amp alternator (OEM F32Z-10346-B, K801-18-300B) operates near thermal limits under sustained demand. Underhood heat soak degrades internal diode rectifiers, stator insulation, and voltage regulators over time. Running auxiliary lighting, audio amplifiers, or recovery gear causes severe voltage drop and brush wear, triggering low-voltage faults comparable to P0562.

Common Symptoms of a Failing OEM Alternator

  • Charging Warning & Voltage Drop: Illuminated battery light or low system voltage (comparable to P0562) from burned rectifier diodes failing to maintain 14V.
  • Dimming Lights & Idle Cutout: Headlight flicker and accessory shutdown at idle when electrical draw exceeds aging stator capacity.
  • Hard Starting & Depleted Battery: Chronic undercharging weakens battery reserve and strains starter cranking.

The High-Output Direct-Fit Alternator Solution

Built in the USA as a complete new unit—never a rebuilt core or pull-off—this 200-amp alternator includes the housing, pulley, regulator, and internal windings. High-capacity stator windings and heavy-duty rectifier architecture handle elevated amperage loads without thermal breakdown on the GE platform. Designed to bolt directly into factory KL-DE 2.5L V6 mounts, it replaces KL11-18-300E and KL11-18-300R with stock belt alignment.

What's Included

  • 1 Complete New 200-Amp 12V Alternator (housing, pulley, voltage regulator, and internal windings)

Technical Specifications

Fitment 1993 Mazda MX-6
Engine / Chassis KL-DE 2.5L V6 / GE
Factory Electrical Output 90 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13446, 13446-200A, 210-4128, F32Z-10346-B, K801-18-300B, KL11-18-300E, KL11-18-300R, K801-18-300C, KL11-18-300C, KL11-18-300D

Compatibility

  • 1993 Mazda MX-6 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the GE MX-6?

Yes. This is a direct fit for the 1993 Mazda MX-6 equipped with the KL-DE 2.5L V6 engine. Excludes hybrid powertrains, other displacements, and non-1993 model years; confirm pulley and connector before ordering.

What pre-installation checks prevent voltage drop?

Inspect the drive belt, tensioner, and battery cables before installation. A 200-amp unit exposes worn belts or weak cables; verify charging voltage at the battery with a meter after startup.

Are special spacers or modifications needed for installation?

No modifications are required. Disconnect the battery prior to removal, transfer factory spacers or dust covers only if designed for reuse, and torque mounting bolts to factory specification.

The Mazda Performance Standard

Engineered in the USA for JDM electrical stability, this alternator sustains clean system voltage across high-RPM pulls and heavy accessory loads on the GE chassis. Reliable current output protects ignition saturation and fuel pump delivery.




Mueble

Hacer

Mazda

Tamaño del motor

  • 2.5L

Año

    Garantía

    Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

    High Output Alternator for Mazda MX-6 (1993) 2.5L

    $337.95