Saltar al contenido del producto
1 de 4

High Output Alternator for Honda CR-V (2012-2014) 2.4L



Precio regular $355.95
Precio de oferta $355.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 320A Alternator for 2012-2014 Honda CR-V (RM3/RM4)

What it Does: This new 320-amp, 12-volt high-output alternator replaces the OEM charging unit on 2012-2014 Honda CR-V RM3/RM4 models with the K24Z7 2.4L engine to sustain stable voltage under heavy electrical loads.

The Stock Honda CR-V Charging Bottleneck

On the RM3/RM4 CR-V equipped with the K24Z7 2.4L engine, the 120-amp OEM unit (104210-1530 / 31100-RX0-A01) saturates quickly when auxiliary lighting, audio, or recovery gear draw continuous current. Sustained overload induces severe stator heat soak and burns out the internal diode rectifier bridge. As charging efficiency drops, the ECM logs P0562 or P0620 fault codes while starving the battery at idle.

Common Symptoms of a Failing OEM Alternator

  • Check Engine / Battery Lights: Triggers P0562 low-voltage or P0620 control circuit fault codes.
  • Voltage Drop Under Load: Dimming headlights and sluggish electrical accessories at idle.
  • Hard Starting: Chronically undercharged battery cells cause slow cranking and premature failure.

The High-Output 320A Alternator Solution

Built strictly from new components rather than a remanufactured core, this 320-amp assembly bolts directly onto K24Z7 2.4L mounts using OEM connector geometry. Upgraded internal windings, a calibrated regulator, and a pre-installed overdrive pulley maximize low-RPM current delivery without bracket modifications. Pairing this unit with a heavier fused main charging cable and verifying serpentine belt length prevents slip and ensures full current capacity.

What's Included

  • 1 New 320-Amp 12V High-Output Alternator (Assembled with Housing, Overdrive Pulley, Regulator, and Internal Windings)

Technical Specifications

Fitment 2012-2014 Honda CR-V
Engine / Chassis K24Z7 2.4L / RM3/RM4
Factory Electrical Output 120 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 104210-1530, 31100-RX0-A01, CSJ53, 31100RX0A01

Compatibility

  • 2012-2014 Honda CR-V 2.4L (Gasoline Only; Excludes Hybrid Powertrains and Other Engine Displacements)

Frequently Asked Questions & Fitment Warnings

Does this fit the RM3/RM4 CR-V?

Yes. This is a direct fit for the 2012-2014 Honda CR-V equipped with the K24Z7 2.4L engine. Excludes hybrid powertrains, other displacements, and outside years; verify your connector and pulley before ordering.

Will this clear P0562 codes, and can I reuse the stock pulley?

Yes, it clears P0562 low-voltage faults, but keep the installed overdrive pulley. Swapping the original OEM pulley back onto this unit reduces rotor speed and cuts charging output at idle.

What belt or wiring upgrades are recommended for installation?

Use a heavier fused main charging cable and check belt tension. Install a slightly shorter belt if squealing occurs, disconnect the battery, torque bolts to spec, and verify battery voltage with a meter.

The Honda Precision Standard

Engineered for thermal durability and stable 12V regulation, this bolt-on alternator safeguards factory electronics under heavy accessory loads. It sustains dependable charging headroom across the entire RPM range.




Mueble

Hacer

Honda

Tamaño del motor

  • 2.4L

Año

  • 2012
  • 2013
  • 2014

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Honda CR-V (2012-2014) 2.4L

$355.95