Saltar al contenido del producto
1 de 5

High Output Alternator for Ford Probe (1993-1997) 2.5L



Precio regular $337.95
Precio de oferta $337.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Output 200A Alternator for 1993-1997 Ford Probe (GE)

What it Does: This new 200-amp, 12-volt alternator replaces the stock unit on the 1993-1997 Ford Probe (GE) KL-DE 2.5L to power auxiliary electrical loads.

The Stock Ford Probe Charging Bottleneck

On the GE chassis equipped with the KL-DE 2.5L V6, the factory 90-amp alternator operates near thermal limits inside a tight engine bay. Prolonged under-hood heat soak degrades stator winding insulation and causes diode rectifier burnout or voltage regulator failure under aftermarket loads. As idle charging efficiency drops, the battery drains and triggers voltage faults like P0562 or P0563 on OBD-II models and dashboard warning lights.

Common Symptoms of a Failing OEM Alternator

  • Charging Fault Codes: Low or erratic voltage sets P0562 or P0563 and illuminates the battery light.
  • Voltage Drop Under Load: Dimming headlights and weak power delivery when running audio or auxiliary lighting.
  • Hard Starting & Noise: Discharged batteries between drives, bearing whine, or odor from burnt rectifier diodes.

The High-Output 200-Amp Alternator Solution

Built new in the USA—not a rebuilt core—this 200-amp, 12-volt assembly bolts directly to KL-DE 2.5L mounts. Its housing, pulley, internal windings, and regulator come pre-assembled to replace F32Z-10346-B and KL11-18-300E. Higher current capacity keeps the battery charged under heavy accessory loads, while actual output scales with engine speed and electrical demand. No cutting or bracket fabrication is required, and matching connector geometry simplifies installation.

What's Included

  • 1 Complete High-Output 200-Amp Alternator (housing, pulley, regulator, internal windings)

Technical Specifications

Fitment 1993-1997 Ford Probe
Engine / Chassis KL-DE 2.5L V6 / GE
Factory Electrical Output 90 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13446, 13446-200A, 210-4128, F32Z-10346-B, K801-18-300B, KL11-18-300E, KL11-18-300R, K801-18-300C, KL11-18-300C, KL11-18-300D

Compatibility

  • 1993-1997 Ford Probe 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the GE Probe?

Yes. Direct fit for 1993-1997 Ford Probe KL-DE 2.5L models. Excludes hybrids, other displacements, and outside years; confirm pulley and connector first.

Will this fix P0562/P0563 codes, and is it rebuilt?

Yes, it restores charging voltage. This is a new unit—not a rebuilt core—replacing 13446 and 210-4128; verify battery voltage after startup.

Are belts or installation hardware included?

No, only the alternator is included. Inspect belts, tensioners, and cables first, reuse original spacers only if applicable, and torque bolts to spec.

The Ford Performance Standard

Built for steady high-RPM voltage and accessory reliability on the GE platform. Direct bolt-on fitment delivers dependable 200-amp charging capacity without wiring modifications.




Mueble

Hacer

Ford

Tamaño del motor

  • 2.5L

Año

  • 1993
  • 1994
  • 1995
  • 1996
  • 1997

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Ford Probe (1993-1997) 2.5L

$337.95