High Output Alternator for Ford Explorer (2009-2010) 4.6L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
High-Output 250A Alternator for 2009-2010 Ford Explorer (U251)
What it Does: The 250-amp high-output alternator replaces the factory charging unit on the 2009-2010 Explorer to eliminate voltage drop and maintain battery charge under high-demand electrical loads.
The Stock Ford Explorer Charging Limitations
The factory charging system on the U251 chassis struggles when powering supplemental electrical equipment such as aftermarket amplifiers, winches, air compressors, or secondary off-road lighting. The stock low-amperage stator generates excessive heat under load, inducing diode pack degradation, rotor resistance, and voltage sag below 13.0V at idle speeds. Over time, persistent thermal strain degrades charging efficiency, causing recurring battery failure and erratic accessory operation.
The Engineering Solution
This upgraded unit solves capacity deficits by utilizing heavy-gauge, high-temperature copper stator windings and a precision-balanced rotor to yield sustained 250-amp delivery. High-grade internal voltage regulation maintains a stable 13.8V to 14.5V output to prevent component starvation across all RPM bands. Assembled with premium sealed bearings and direct-fit OE casing architecture, it bolts into place using the factory serpentine belt alignment and plugs into the OEM engine harness without modifications.
What's Included
- 1x High-Output 250A Alternator (Part # 11433-250A)
Technical Specifications
| Fitment | 2009-2010 Ford Explorer |
|---|---|
| Engine / Chassis | 4.6L 3-Valve Modular V8 / U251 |
| Stock Output | 292 hp / 315 lb-ft |
| Replaces OEM Part # | 104210-5850, GL-962, 9L2Z-10346-A, 11433, 11433N |
Compatibility
- 2009-2010 Ford Explorer Eddie Bauer 4.6L V8
- 2009-2010 Ford Explorer Limited 4.6L V8
- 2009-2010 Ford Explorer XLT 4.6L V8
Frequently Asked Questions & Fitment Warnings
Does this fit the U251 Explorer?
Yes, this is a direct fit for the 2009-2010 Ford Explorer equipped with the 4.6L 3-Valve Modular V8 engine. It is not compatible with 4.0L V6 models.
Do I need to upgrade my electrical wiring for this 250A alternator?
While the unit utilizes factory plug connections, upgrading the main charging (B+) and ground cables to 0-gauge or 4-gauge wire ("Big 3 Upgrade") is strongly recommended to safely carry peak amperage output.
The Ford Utility Standard
Constructed to endure severe utility and towing duties, this heavy-duty charging upgrade ensures uninterrupted 12V bus reliability under heavy continuous draw.
Mueble
Mueble
Garantía
Garantía
