Saltar al contenido del producto
1 de 4

High Output Alternator for Ford Escape (2013-2018) 2.0L 2.5L



Precio regular $565.95
Precio de oferta $565.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

300-Amp High-Output Alternator for 2013-2018 Ford Escape (C520)

What it Does: This complete 300-amp, 12-volt alternator replaces the factory charging unit on 2013-2018 Ford Escape (C520) 2.0L EcoBoost and 2.5L Duratec models to sustain heavy electrical loads.

The Stock Ford Escape Charging System Bottleneck

Factory 150-amp alternators on the C520 chassis equipped with the 2.0L EcoBoost or 2.5L Duratec run near thermal capacity when powering auxiliary lights, audio amplifiers, or recovery gear. Sustained load causes underhood heat soak that degrades stator insulation and overloads the diode rectifier bridge. Voltage then drops at idle, triggering PCM charging faults like P0562 (System Voltage Low) and P0620 (Generator Control Circuit).

Common Symptoms of a Failing OEM Alternator

  • Charging System DTCs: Stored P0562, P0620, or P0625 codes from insufficient stator output or regulator faults.
  • Voltage Drop Under Load: Dimming headlights and battery drain at idle when running electrical accessories.
  • Rectifier or Bearing Wear: Front bearing whine, hot winding odor, or dead batteries causing hard starts.

The High-Output 300-Amp Alternator Solution

Manufactured in the USA as a brand-new unit rather than a rebuilt core, this 300-amp replacement upgrades the 11551 / 11551N charging assembly with heavy-duty internal windings and a high-capacity voltage regulator. Supplied with the housing and pulley pre-assembled, it bolts directly into factory mounts without cutting. Paired with a sound belt, tensioner, and battery cables, it maintains stable 12-volt output under high electrical demand.

What's Included

  • 1x Complete 300-Amp High-Output Alternator (assembled housing, pulley, regulator, and windings)

Technical Specifications

Fitment 2013-2018 Ford Escape
Engine / Chassis 2.0L EcoBoost, 2.5L Duratec / C520
Factory Electrical Output 150 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11551, 11551N

Compatibility

  • 2013-2018 Ford Escape 2.0L
  • 2013-2018 Ford Escape 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the C520 Escape?

Yes. This is a direct fit for the 2013-2018 Ford Escape equipped with the 2.0L EcoBoost or 2.5L Duratec engine. Do not install on hybrid powertrains, other displacements, or years outside 2013-2018; verify engine size, pulley, and connector before ordering.

Will this resolve P0562 or P0620 charging codes?

Yes, when caused by a failed alternator. Installing this new 11551 / 11551N unit restores proper charging voltage, though battery cables, belt tension, and fuses must be inspected.

What prep is required during installation?

Disconnect the battery first. Transfer spacers or dust covers only if designed for reuse, torque mounting bolts to factory spec, and verify charging voltage at the battery.

The Ford Heavy-Duty Standard

Engineered for thermal durability under demanding accessory loads, this USA-built 300-amp alternator keeps your C520 Escape charging reliably across daily driving and heavy electrical duty.




Mueble

Hacer

Ford

Tamaño del motor

  • 2.0L
  • 2.5L

Año

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

High Output Alternator for Ford Escape (2013-2018) 2.0L 2.5L

$565.95