High Output Alternator for Dodge Dynasty (1990-1993) 3.0L 3.3L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
High-Amp 200A Alternator for 1990-1993 Dodge Dynasty (AC Platform)
What it Does: The high output alternator delivers a stable 200-amp electrical supply for the 1990-1993 Dodge Dynasty, eliminating system voltage drops and preventing idle-state battery drain under heavy accessory loads.
The Stock Dodge Dynasty Charging Deficiencies
Factory alternators equipped on the AC-body platform deliver between 75 and 90 amps, engineered strictly to support basic period electronics. With age, original stator insulation degrades and diodes suffer thermal fatigue under sustained heat cycles. When adding aftermarket audio, electric cooling conversions, or modern auxiliary electronics, the factory unit drops below nominal charging voltage (13.5V–14.5V) at idle. This leads to dimmed lighting, sluggish starter engagement, sulfated battery cells, and unstable reference voltages to the engine control unit.
The Engineering Solution
This 200-amp direct replacement is constructed with high-temp, heavy-gauge copper stator windings and a dynamic balanced rotor to maintain high amperage output even at low engine RPM. Upgraded internal solid-state voltage regulation keeps voltage strictly in the 14.2V–14.6V range to protect vehicle computers. Double-sealed, low-drag bearings reduce mechanical drag and minimize bearing whine under load. Designed for direct OE bracket alignment, it reuses stock pulley geometry, rotation direction, and standard harness pinouts without chassis modifications.
What's Included
- 1 High Output 200-Amp Alternator (Part # 13307-200A)
Technical Specifications
| Fitment | 1990-1993 Dodge Dynasty |
|---|---|
| Engine / Chassis | 3.0L 6G72 / 3.3L EGA / Chrysler AC Platform |
| Stock Output | 141-162 hp / 171-185 lb-ft |
| Replaces OEM Part # | 13307, 13307N, 13307R, AL6509X, AL6509N, 5234032, 121000-3400, 210-0142, 210-0105 |
Compatibility
- 1991-1993 Dodge Dynasty 3.0L V6 (6G72)
- 1990-1993 Dodge Dynasty 3.3L V6 (EGA)
Frequently Asked Questions & Fitment Warnings
Does this fit the AC-body Dynasty?
Yes, this unit directly bolts onto the 1990-1993 Dodge Dynasty equipped with the 3.0L 6G72 or 3.3L EGA V6 engines using original brackets and connectors.
Should I upgrade wiring for this 200-amp unit?
To safely utilize the full 200-amp capacity, perform a Big 3 wiring upgrade by running 4-gauge or 1/0-gauge positive and chassis ground cables.
The Dodge Reliability Standard
Engineered to handle severe heat cycles and modern continuous loads, this unit restores electrical integrity and transient voltage stability across all standard and auxiliary circuits.
Mueble
Mueble
Garantía
Garantía
