Exhaust Tips Black for Ford Super Duty F-250 F-350 F-450 (2008-2010) 6.4L Diesel 4 Inch Inlet

T304 Stainless Dual-Outlet Exhaust Tip for 2008-2010 Ford F-250, F-350, F-450 (P356)

What it Does: The dual-outlet exhaust tip assembly slips onto the 4-inch tailpipe of the 2008-2010 Ford Super Duty to streamline exhaust exit gas dispersion, shield body panels from soot accumulation, and eliminate bare-metal tailpipe oxidation.

The Stock Ford F-250, F-350, F-450 Tailpipe Degradation

Factory exhaust routing on the P356 platform Super Duty exposes bare, raw-finish tailpipes to extreme thermal cycling, road brine, and continuous particulate buildup. The 6.4L Power Stroke generates severe exhaust gas temperatures (EGTs) during diesel particulate filter (DPF) active regeneration cycles, frequently exceeding 1,100°F. These sustained thermal spikes bake diesel soot onto unshielded carbon-steel or low-grade 409 stainless tailpipes, precipitating rapid pitting, flaking, and surface oxidation right at the quarter-panel exit.

The Engineering Solution

Fabricated from heavy-gauge, double-walled T304 stainless steel, this MT-DUAL-4060-BK assembly splits a single 4-inch exhaust stream into dual staggered 6-inch slant outlets. The double-wall design acts as a heat barrier, reducing exterior surface temperature discoloration while the thermal gloss-black finish resists soot etching and road salt corrosion. Precision TIG-welded seams prevent acoustic resonance and structural fatigue under heavy payload conditions. The 13.5-inch overall span redirects high-temperature particulate away from rear tire compounds and body trim without restricting post-filter flow velocity.

What's Included

• 1 Dual-Outlet Exhaust Tip Assembly (4" inlet, dual 6" staggered slant outlets, Part # MT-DUAL-4060-BK)

Technical Specifications

Compatibility

• 2008-2010 Ford F-250 Super Duty 6.4L Power Stroke Diesel (Factory 4-inch tailpipe)
• 2008-2010 Ford F-350 Super Duty 6.4L Power Stroke Diesel (Factory 4-inch tailpipe)
• 2008-2010 Ford F-450 Super Duty 6.4L Power Stroke Diesel (Factory 4-inch tailpipe)
• 1999-2007 Ford Super Duty 7.3L / 6.0L (Only if retrofitted with an aftermarket 4-inch exhaust system)

Frequently Asked Questions & Fitment Warnings

Does this fit the P356 F-250, F-350, F-450?

Yes, this is a direct fit for the 2008-2010 Ford F-250, F-350, and F-450 equipped with the 6.4L Power Stroke engine and factory 4-inch tailpipe. It will not fit factory 3-inch or 3.5-inch exhaust systems found on stock 7.3L or 6.0L models, nor will it accommodate 5-inch aftermarket diesel exhausts.

Can this tip be clamped or does it require welding?

This unit can be secured using a heavy-duty 4-inch exhaust band clamp or permanently TIG-welded to the tailpipe to withstand severe towing vibration.

The Ford Super Duty Standard

Built to handle maximum gross combined weight ratings, this tip withstands the extreme continuous thermal loads of heavy fifth-wheel towing and high-boost commercial hauling without structural failure.