Engine and Transmission Mount Kit for Mercedes Benz C-Class (2008-2015) 3.0L 3.5L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Engine and Transmission Mount Kit for 2008-2015 Mercedes Benz C-Class (W204)
What it Does: This three-piece engine and transmission mount kit restores factory powertrain alignment and vibration isolation on 2008-2015 Mercedes Benz C-Class (W204) models equipped with naturally aspirated M272 3.0L and M276 3.5L V6 engines.
The Stock Mercedes Benz C-Class Hydraulic Mount Failure
Factory hydro-mounts on the W204 sit directly adjacent to the exhaust manifolds, exposing elastomer membranes to continuous thermal cycling and heat soak. Over time, rubber vulcanization hardens and cracks, leaking internal damping fluid and collapsing the mount core under M272 and M276 V6 torque loads. Once collapsed, powertrain geometry shifts downward, overloading the rear mount while risking subframe contact, wiring harness strain, or false P0325 knock sensor triggers.
Common Symptoms of a Failing OEM Mount Kit
- Takeoff & Shift Clunking: Excess engine pitch causes audible metallic thuds against the subframe during acceleration or gear engagement.
- Cabin Vibration & Harshness: Ruptured hydraulic chambers lose isolation, transmitting raw V6 firing pulses into the steering column and floorpan.
- Exhaust & Harness Strain: Collapsed mounts drop the engine lower in the cradle, stressing exhaust flex joints and coolant lines.
The Direct-Fit 3-Piece Mount Kit Solution
This complete three-piece kit replaces both engine mounts and the transmission mount simultaneously to eliminate uneven torsional preload across the W204 subframe. Built with high-durometer elastomer compounds bonded to corrosion-resistant housings, each mount replicates factory hydraulic damping rates and OEM stud geometry. Direct replacement of OE part numbers A2042404317, A2042400917, and A2122400418 restores crankshaft-to-driveshaft alignment without modifying factory crossmembers or brackets.
What's Included
- 2 Engine Mounts
- 1 Transmission Mount
- Note: Hydraulic lines, heat shields, and fasteners beyond what is pre-installed on the mounts are not included.
Technical Specifications
| Fitment | 2008-2015 Mercedes Benz C-Class |
|---|---|
| Engine / Chassis | M272 3.0L & 3.5L / M276 3.5L V6 / W204 |
| Stock Engine Output | 228–302 hp / 221–273 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | A2042404317, A2202401818, A2042400917, 2042400917, 204240431764, 2122400418, A2122400418, at10576 |
Compatibility
- 2008-2011 Mercedes Benz C-Class 3.0L Flex Naturally Aspirated
- 2008-2011 Mercedes Benz C-Class 3.0L Gas Naturally Aspirated
- 2012-2014 Mercedes Benz C-Class 3.5L Flex Naturally Aspirated
- 2008-2015 Mercedes Benz C-Class 3.5L Gas Naturally Aspirated
Frequently Asked Questions & Fitment Warnings
Does this fit the W204 C-Class?
Yes. This is a direct fit for the 2008-2015 Mercedes Benz C-Class equipped with the M272 3.0L/3.5L or M276 3.5L naturally aspirated V6 engine. This kit is not listed for Bluetec diesel engines; confirm year, model, and displacement before ordering.
Does this kit include just one side, or all three mounts?
All three mounts are included. You get both left and right engine mounts plus the transmission mount to keep the W204 powertrain aligned and avoid leaving a tired mount in service.
Are heat shields included, and what installation prep is required?
No heat shields, hydraulic lines, or separate fasteners are included. Installation requires safely supporting the engine and transmission, unbolting the worn units, transferring factory shields, and torquing fasteners to vehicle specifications.
The Mercedes Benz Precision Standard
Maintaining exact drivetrain geometry on the W204 platform prevents driveline harshness, exhaust stress, and false ECU knock sensor feedback. Replacing all three mounts together restores quiet, factory-spec isolation across the 3.0L and 3.5L V6 powerband.
Mueble
Mueble
|
Hacer |
Mercedes Benz |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$222.95