Saltar al contenido del producto
1 de 6

Drive Belt Tensioner Kit for BMW X3 (2011-2017) 3.0L



Precio regular $180.95
Precio de oferta $180.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Drive Belt Tensioner Kit for 2011-2017 BMW X3 (F25)

What it Does: A direct-fit accessory drive service kit maintaining proper serpentine belt tension across the alternator and pulleys on the 2011-2017 BMW X3 (F25) 3.0L I6.

The Stock BMW X3 Belt & Tensioner Failure

On the F25 chassis with the N52 or N55 3.0L I6, sustained underhood heat soak degrades the factory accessory drive. The tensioner's internal spring loses preload, causing belt flutter, while idler pulley bearings lose grease and seize. Glazed belt ribs slip across the alternator, triggering low-voltage codes like P0562 and charging warnings. Left unaddressed, a thrown belt can jam behind the crankshaft pulley and front main seal.

Common Symptoms of a Failing OEM Drive Belt System

  • Charging Faults & DTCs: Belt slip lowers alternator output, triggering battery warnings and P0562.
  • Squeal or Bearing Chirp: Dry idler bearings and weak tensioner springs cause cold-start chirping.
  • Rib Cracking or Belt Loss: Misaligned pulleys shred belt edges or throw the belt.

The Direct-Fit Serpentine Drive Solution

Replacing the tensioner, both idler pulleys, and belt together prevents repeat teardowns when an old bearing fails. This direct-fit kit combines a calibrated cast tensioner with sealed-bearing idler pulleys engineered for high-RPM stability on N52 / N55 engines. Its matched multi-rib serpentine belt seats accurately in every pulley groove. Replacing OEM numbers 11288673720, 11288604266, 11287628659, and 11287615130, every component bolts directly into factory mounting bosses.

What's Included

  • 1 Drive Belt Tensioner
  • 2 Idler Pulleys
  • 1 Drive Belt

Technical Specifications

Fitment 2011-2017 BMW X3
Engine / Chassis N52 / N55 3.0L I6 / F25
Stock Engine Output 240–300 hp / 221–300 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2011-2012 BMW X3 — 3.0L Gas Naturally Aspirated (N52)
  • 2011-2017 BMW X3 — 3.0L Gas Turbocharged (N55)

Frequently Asked Questions & Fitment Warnings

Does this fit the F25 X3?

Yes. This is a direct fit for the 2011-2017 BMW X3 equipped with the N52 / N55 3.0L I6 engine. Not compatible with 2.0L four-cylinder or 4.4L V8 models.

How many pulleys and is a water pump included?

Two idler pulleys, one tensioner, and one belt; no water pump. Fan and timing-chain parts are also excluded.

What does installation require?

Relieve tension, replace all four components, and torque fasteners to spec. Confirm factory routing and full groove seating before startup.

The BMW Precision Standard

Engineered for precise belt tracking and stable charging voltage on the F25 platform. Restore quiet accessory drive operation without slip or warning lights.




Mueble

Hacer

BMW

Tamaño del motor

  • 3.0L

Año

  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Drive Belt Tensioner Kit for BMW X3 (2011-2017) 3.0L

$180.95