Saltar al contenido del producto
1 de 6

Drive Belt Tensioner Kit for BMW 6 Series (2012-2019) 3.0L



Precio regular $180.95
Precio de oferta $180.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Drive Belt Tensioner Kit for 2012-2019 BMW 6 Series (F06 / F12 / F13)

What it Does: This drive belt tensioner kit restores factory accessory drive tension and pulley alignment on the 2012-2019 BMW 6 Series (F06 / F12 / F13) equipped with the N55B30 3.0L inline-six.

The Stock BMW 6 Series Accessory Drive Failure

On the F06 / F12 / F13 equipped with the N55B30 3.0L engine, underhood heat soak dries out sealed idler bearing grease and weakens the tensioner's internal spring. As the tensioner arm cocks out of alignment, uneven tracking causes belt rib glazing, fraying, and accessory speed loss. Left unaddressed, belt slip triggers low-voltage faults like P0562 or causes the serpentine belt to walk off the pulleys.

Common Symptoms of a Failing OEM Drive Belt Tensioner Kit

  • Charging Faults: Belt slip drops alternator output, triggering battery warnings and P0562 codes.
  • Cold-Start Squeal: Dry idler bearings and fatigued tensioner springs chirp during startup or A/C load.
  • Belt Wear: Cracked ribs, glazed backing, or edge fraying signal impending belt separation.

The Direct-Fit Front Accessory Drive Solution

This service kit replaces every front-drive wear point with a cast aluminum tensioner, two sealed-bearing idler pulleys, and a multi-rib EPDM serpentine belt. Built to match OEM references 11288673720, 11288604266, 11287628659, and 11287615130, the heat-resistant belt compound resists cracking while maintaining consistent wrap tension. Direct bolt-on factory geometry ensures proper groove seating and prevents repeat service from worn leftover pulleys.

What's Included

  • 1x Drive Belt Tensioner
  • 2x Idler Pulleys
  • 1x Drive Belt

Technical Specifications

Fitment 2012-2019 BMW 6 Series
Engine / Chassis N55B30 3.0L I6 Turbo / F06, F12, F13
Stock Engine Output 315 hp / 330 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2012-2019 BMW 6 Series — 3.0L Gas Turbocharged (3.0L Inline-Six)

Frequently Asked Questions & Fitment Warnings

Does this fit the F06 / F12 / F13 6 Series?

Yes. Direct fit for the 2012-2019 BMW 6 Series equipped with the N55B30 3.0L inline-six engine. Not compatible with 2.0L four-cylinder or 4.4L V8 applications.

Will this resolve P0562 belt slip, and is a water pump included?

Yes for belt slip; water pump not included. Replacing the belt, tensioner, and idlers resolves P0562 charging slip; water pump, fan, and timing-chain parts are excluded.

How many pulleys are included and what does installation require?

Two idler pulleys, one tensioner, and one belt are included. Relieve tension, install per factory routing, torque fasteners to spec, and verify full groove seating.

The BMW Precision Standard

Engineered for exact N55B30 accessory geometry, this kit restores quiet pulley operation and stable charging voltage. Service all front-drive wear points together for reliable, fault-free F06 / F12 / F13 operation.




Mueble

Hacer

BMW

Tamaño del motor

  • 3.0L

Año

  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Drive Belt Tensioner Kit for BMW 6 Series (2012-2019) 3.0L

$180.95