Saltar al contenido del producto
1 de 6

Drive Belt Tensioner Kit for BMW 4 Series (2014-2016) 3.0L



Precio regular $180.95
Precio de oferta $180.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Serpentine Drive Belt Tensioner Kit for 2014-2016 BMW 4 Series (F32/F33/F36)

What it Does: This drive belt tensioner kit restores factory accessory belt tension and pulley alignment on 2014-2016 BMW 4 Series F32/F33/F36 models equipped with the N55B30 3.0L turbocharged inline-six.

The Stock BMW 4 Series Accessory Drive Failure

On the F32/F33/F36 chassis equipped with the N55B30 3.0L engine, factory tensioner springs fatigue and internal dampers lose preload from sustained under-hood heat soak. Sealed idler pulley bearings also dry out over time, developing radial play that skews belt tracking. As the belt glazes or cracks, slip under electrical load drops alternator output, triggering charging faults like P0562 and risking belt shredding.

Common Symptoms of a Failing OEM Tensioner & Pulley Assembly

  • Charging Faults: Belt slip under electrical load drops alternator voltage and triggers low-voltage codes like P0562.
  • Pulley Noise: Dry idler bearings and fatigued tensioner arms emit sharp cold-start chirp or rhythmic squealing.
  • Belt Derailment: Worn tensioner bushings cant pulleys off-axis, fraying belt ribs and cutting front-accessory power.

The Direct-Fit Multi-Rib Drive Belt & Pulley Solution

Replacing the tensioner, both idler pulleys, and the serpentine belt together eliminates mismatched component wear and prevents repeat front-drive teardown. Engineered to match OEM 11288673720, 11288604266, 11287628659, and 11287615130 specifications, the cast-aluminum tensioner maintains consistent preload across high-RPM shifts. Sealed pulley bearings resist thermal grease breakdown while the multi-rib belt tracks cleanly in factory grooves.

What's Included

  • 1x Drive Belt Tensioner
  • 2x Idler Pulleys
  • 1x Serpentine Drive Belt

Technical Specifications

Fitment 2014-2016 BMW 4 Series
Engine / Chassis N55B30 3.0L Turbo Inline-Six / F32, F33, F36
Stock Engine Output 300 hp / 300 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2014-2016 BMW 4 Series — 3.0L Gas Turbocharged (N55B30)

Frequently Asked Questions & Fitment Warnings

Does this fit the F32/F33/F36 4 Series?

Yes. This is a direct fit for the 2014-2016 BMW 4 Series equipped with the N55B30 3.0L engine. Not compatible with 2.0L four-cylinder or 4.4L V8 applications.

How many pulleys are included, and is a water pump included?

Two idler pulleys, one tensioner, and one drive belt are included. Water pump, cooling fan, and timing-chain parts are excluded; verify OEM numbers 11288673720 and 11287615130-9 before ordering.

What is required to install this accessory drive kit?

Standard front-accessory-drive hand tools are required. Relieve belt tension, swap the old belt, pulleys, and tensioner, torque fasteners to factory specifications, and verify full rib seating in every groove.

The BMW Precision Standard

Built for N55B30 3.0L thermal demands, this complete front-drive refresh restores quiet belt tracking and stable alternator output. Maintain factory accessory reliability and prevent unexpected roadside belt failure.




Mueble

Hacer

BMW

Tamaño del motor

  • 3.0L

Año

  • 2014
  • 2015
  • 2016

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Drive Belt Tensioner Kit for BMW 4 Series (2014-2016) 3.0L

$180.95