Saltar al contenido del producto
1 de 5

Cold Side Intercooler Pipe Kit for Ford F-250 F-350 (2017-2021) 6.7L



Precio regular $128.95
Precio de oferta $128.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Silicone Cold-Side Intercooler Pipe Kit for 2017-2021 Ford F-250,F-350 (P558)

What it Does: Replaces the cold-side charge-air hose and coupler between the intercooler and intake on 2017-2021 Ford F-250,F-350 P558 trucks with the 6.7L Power Stroke diesel to eliminate boost leaks.

The Stock Ford F-250,F-350 Hose Failure

The factory cold-side hose on the P558 chassis with the 6.7L Power Stroke endures constant thermal cycling, crankcase oil-vapor saturation, and high boost pressure. Over time, the OEM rubber-style coupling softens, swells, and splits near the intercooler outlet or throttle connection. When weakened walls rupture or slip, pressurized charge air escapes under acceleration. This sudden pressure loss triggers P0299 underboost and P2263 turbo performance codes.

Common Symptoms of a Failing OEM Cold-Side Hose

  • Check Engine Light / DTCs: Boost leaks drop manifold pressure below target, setting P0299 or P2263 codes.
  • Audible Hiss & Oil Mist: High-pitched air hiss under load with oil residue at the intercooler coupler.
  • Power Loss & Pop-Off: Sudden throttle derate or charge-air tube blow-off under boost.

The Heavy-Duty Silicone Cold-Side Hose Solution

This kit upgrades the cold-side charge-air path with a formed silicone-style hose, a machined adapter, and two 70-80 mm T-bolt clamps. Its reinforced construction resists oil degradation, thermal fatigue, and boost expansion while maintaining OEM bend geometry between the intercooler and intake. Dry-fit the hose and adapter to confirm clocking against the original pipe before tightening. Even clamp torque prevents hose cutting and sustains a sealed connection.

What's Included

  • (1) Cold-side intercooler hose
  • (1) Machined adapter
  • (2) T-bolt clamps (70-80 mm)
  • Mounting hardware as shown

Technical Specifications

Fitment 2017-2021 Ford F-250,F-350
Engine / Chassis 6.7L Power Stroke / P558
Stock Engine Output 440-475 hp / 925-1,050 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • Ford F-250 2017-2021 6.7L
  • Ford F-350 2017-2021 6.7L

Frequently Asked Questions & Fitment Warnings

Does this fit the P558 F-250,F-350?

Yes. This is a direct fit for the 2017-2021 Ford F-250,F-350 equipped with the 6.7L Power Stroke engine. Excludes F-450 models, 6.2L or 7.3L gas engines, and the hot-side intercooler pipe.

Will this clear P0299 boost leak codes, and is it the hot-side pipe?

Yes for cold-side leaks; no, it is not the hot-side pipe. Renewing a split hose seals boost to resolve P0299 and P2263 faults and is distinct from the 2017-2024 turbo-to-intercooler hot-side pipe.

Are T-bolt clamps included and what installation prep is needed?

Yes. Two 70-80 mm T-bolt clamps and hardware are included; clean both ports, dry-fit for clocking, tighten evenly without cutting the hose, and recheck after a boosted road test.

The Ford Heavy-Duty Standard

Built for P558 Super Duty trucks facing heavy towing heat and high boost, this cold-side kit restores durable charge-air containment. Reliable sealing keeps your 6.7L Power Stroke operating at full efficiency.




Mueble

Hacer

Ford

Tamaño del motor

  • 6.7L

Año

  • 2017
  • 2018
  • 2019
  • 2020
  • 2021

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Cold Side Intercooler Pipe Kit for Ford F-250 F-350 (2017-2021) 6.7L

$128.95