Saltar al contenido del producto
1 de 4

Cold Air Intake Spacer Kit for Mercedes Benz E-Class CLS-Class CL-Class S-Class SL-Class G-Class E55 CLS55 CL55 S55 SL55 G55 (2003-2011) 5.5L



Precio regular $295.95
Precio de oferta $295.95 Precio regular
Envío calculado al finalizar la compra.

  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Flow Cold Air Intake Spacer Kit for 2003-2011 Mercedes-Benz AMG 5.5L Supercharged (W211, C219, C215, W220, R230, W463)

What it Does: The Cold Air Intake Spacer Kit elevates the air filters within the OEM intake assembly on supercharged 5.5L AMG platforms to relieve flow choke points and optimize volume entering the twin air boxes.

The Stock Mercedes-Benz AMG Intake Restriction

The factory dual airbox layout on the supercharged M113K engine tightly recesses the filter elements against the floor of the lower housing. Under heavy load, the Lysholm-type twin-screw supercharger demands massive instantaneous cfm, but the OEM geometry forces air into a turbulent 90-degree boundary layer immediately upon entering the inlet snorkel. This lack of plenum depth creates parasitic vacuum drop across the panel filters, suffocating mass airflow before it reaches the 74mm or upgraded 82mm throttle body, which exacerbates intake air temperatures (IATs) during hard acceleration.

The Engineering Solution

Precision-machined to exact perimeter tolerances, this intake spacer kit acts as a plenum volume extender between the airbox components. By elevating the air filter element away from the restrictive bottom ports, it converts choked, directional airflow into a stabilized velocity stack effect. The increased volume significantly drops pressure loss across the filtration media, ensuring laminar airflow into the Y-pipe collector without requiring modification to factory MAF/MAP calibration or triggering lean engine codes.

What's Included

  • Cold air intake spacer kit
  • Mounting hardware

Technical Specifications

Fitment 2003-2011 Mercedes-Benz E55, CLS55, CL55, S55, SL55, G55 AMG
Engine / Chassis M113.990 / M113.991 / M113K / W211, C219, C215, W220, R230, W463
Stock Output 469-510 hp / 516 lb-ft
Replaces OEM Part # N/A

Compatibility

  • 2003-2008 Mercedes-Benz E-Class E55 AMG 5.5L Supercharged (W211)
  • 2003-2008 Mercedes-Benz CLS-Class CLS55 AMG 5.5L Supercharged (C219)
  • 2003-2008 Mercedes-Benz CL-Class CL55 AMG 5.5L Supercharged (C215)
  • 2003-2008 Mercedes-Benz S-Class S55 AMG 5.5L Supercharged (W220)
  • 2003-2008 Mercedes-Benz SL-Class SL55 AMG 5.5L Supercharged (R230)
  • 2005-2011 Mercedes-Benz G-Class G55 AMG 5.5L Supercharged (W463)

Frequently Asked Questions & Fitment Warnings

Does this fit the W211, C219, C215, W220, R230, and W463 AMG models?

Yes, this is a direct fit for 2003-2011 Mercedes-Benz 55 AMG vehicles equipped with the supercharged M113K 5.5L V8; it does not fit naturally aspirated M113 or M156 6.2L AMG engines.

Are air filters included with this spacer kit?

No, this is a spacer-only hardware kit; compatible OEM-replacement or high-flow panel filters must be reused or purchased separately.

The Mercedes-Benz Performance Caliber

Engineered for high-output European engineering, this bolt-on modification optimizes intake resonance and airflow dynamics without triggering Check Engine Lights or interfering with factory engine cover tolerances.




Mueble

Hacer

Mercedes Benz

Tamaño del motor

  • 5.5L

Año

  • 2003
  • 2004
  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010
  • 2011

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Cold Air Intake Spacer Kit for Mercedes Benz E-Class CLS-Class CL-Class S-Class SL-Class G-Class E55 CLS55 CL55 S55 SL55 G55 (2003-2011) 5.5L

$295.95