Catalytic Converter for Volvo XC60 (2010-2016) 3.0L

Direct-Fit Catalytic Converter for 2010-2016 Volvo XC60 (P3)

What it Does: This direct-fit catalytic converter bolts onto the 2010-2016 Volvo XC60 T6 (P3) with the B6304T2/B6304T4 3.0L Turbo I6 to restore factory exhaust flow and emissions control.

The Stock Volvo XC60 Catalytic Converter Failure

On the P3 XC60 with the B6304T2/B6304T4 3.0L Turbo I6, high exhaust gas temperatures cause severe thermal cycling across the factory converter. Repeated heat soak degrades the precious-metal washcoat and fractures the ceramic honeycomb substrate, while torque stresses the stock flex joint. Loose internal brick fragments rattle or choke exhaust flow. As oxygen-storage capacity drops, the ECM triggers P0420 or P0430 faults.

Common Symptoms of a Failing OEM Catalytic Converter

• Check Engine Light / DTCs: Logs P0420 or P0430 when downstream O2 readings mirror upstream readings.
• Metallic Exhaust Rattle: Fractured ceramic honeycomb pieces vibrate inside the shell at idle.
• Backpressure & Emissions Failure: Restricted flow reduces turbo spool and fails OBD-II testing.

The Direct-Fit Stainless Catalytic Converter Solution

This one-piece unit (AXG007) combines front and rear catalysts, a flex joint, and a dual-outlet rear section for bolt-on replacement without cutting or welding. Its stainless steel body (8 in long, 5 in high) resists rust and heat cracking, while the ceramic honeycomb substrate and precious-metal washcoat convert HC, CO, and NOx. Factory flanges, hangers, and pre/post-catalyst O2 sensor bungs ensure OEM alignment.

What's Included

• 1 x Catalytic Converter Assembly
• 1 x Dual-Port Flange Gasket

Technical Specifications

Compatibility

• 2010-2016 Volvo XC60 T6 AWD (3.0L Turbo I6)
• R-Design, Platinum, and Premier trims
• Excludes 3.2L non-turbo and 2.0L

Frequently Asked Questions & Fitment Warnings

Does this fit the P3 XC60?

Yes. Fits 2010-2016 Volvo XC60 T6 AWD (B6304T2/B6304T4 3.0L Turbo I6). Excludes 3.2L/2.0L models; not CARB approved for CA, NY, CO, or ME.

Will this clear P0420/P0430 codes, and are O2 sensors included?

Yes, if catalyst-related; O2 sensors are not included. Transfer or replace sensors, clear P0420/P0430 codes, and inspect for exhaust leaks.

Are gaskets included for installation?

Yes, a dual-port flange gasket is included. Cool the exhaust, soak fasteners with penetrating oil, and torque flanges evenly.

The Volvo Precision Standard

Built for Euro emissions accuracy and P3 ECM tolerances, this unit restores clean flow and CEL-free operation. Compare with your original unit before installing.