Catalytic Converter for Land Rover Range Rover Evoque (2012-2013) 2.0L

Direct-Fit Catalytic Converter for 2012-2013 Land Rover Range Rover Evoque (L538)

What it Does: This direct-fit catalytic converter bolts behind the turbocharger on the 2012-2013 Land Rover Range Rover Evoque (L538) 204PT 2.0L Si4 to reduce HC, CO, and NOx emissions to factory OBD-II standards.

The Stock Land Rover Range Rover Evoque Catalyst Failure

Mounted directly at the turbocharger outlet on the L538 chassis, the OEM catalytic converter endures severe exhaust heat soak and rapid thermal cycling from the 204PT 2.0L Si4 engine. Over time, unburned fuel wash and extreme temperatures degrade the precious-metal washcoat and fracture the ceramic honeycomb substrate. Cyclic drivetrain movement also fatigues the factory flex joint, causing exhaust leaks that skew O2 sensor feedback and trigger P0420 or P0430 codes.

Common Symptoms of a Failing OEM Catalytic Converter

• Check Engine Light & DTCs: Stored P0420 or P0430 codes from depleted catalyst oxygen storage capacity.
• Metallic Rattle: Buzzing or clattering under acceleration caused by a fractured ceramic substrate inside the shell.
• Power Loss & Backpressure: Sluggish boost response and failed emissions inspections due to a clogged core.

The Direct-Fit Stainless Exhaust Solution

Constructed with a rust-resistant stainless steel body (8-inch length, 5-inch height) and heavy-duty piping, this converter restores OEM flow geometry without cutting or welding. Its ceramic honeycomb substrate utilizes a calibrated precious-metal washcoat for efficient HC, CO, and NOx conversion under OBD-II monitoring. Complete with a factory turbo-side flange, braided flex joint, OE-style support bracket, rear 3-bolt flange, and dual pre/post-catalyst O2 sensor ports, it seals reliably under boost.

What's Included

• 1 x Direct-Fit Catalytic Converter
• 1 x Ring Seal
• 1 x 3-Bolt Flange Gasket

Technical Specifications

Compatibility

• 2012-2013 Land Rover Range Rover Evoque Pure (2.0L Turbocharged I4)
• 2012-2013 Land Rover Range Rover Evoque Prestige (2.0L Turbocharged I4)
• 2012-2013 Land Rover Range Rover Evoque Dynamic (2.0L Turbocharged I4)

Frequently Asked Questions & Fitment Warnings

Does this fit the L538 Range Rover Evoque?

Yes. Fits 2012-2013 Land Rover Range Rover Evoque models with the 204PT 2.0L Si4 engine. Excludes 2014+ models; EPA federal unit only—not CARB approved for vehicles registered in California, New York, Colorado, or Maine.

Will this clear P0420/P0430 codes, and are O2 sensors included?

Yes for worn-catalyst codes; O2 sensors are not included. Transfer existing sensors or install new units after checking for exhaust leaks to resolve P0420 and P0430 faults.

Are installation gaskets included?

Yes, the ring seal and 3-bolt flange gasket are included. Allow the exhaust to cool, soak fasteners with penetrating oil, torque evenly, and inspect every joint for leaks.

The Land Rover Precision Standard

Turbocharged L538 powertrains depend on calibrated backpressure and accurate O2 sensor feedback for CEL-free ECU operation. This direct-fit converter restores factory emissions compliance and quiet mechanical durability without fabrication.